Sandpaper Discs Dedra Anti-clog 125 mm Ø, 150 grit, hook-and-loop, set of 5

Dedra Anti-clog sandpaper discs, 125 mm diameter with 150 grit, provide consistent abrasive performance for orbital and rotary sanders that accept 125 mm discs. The set of 5 hook-and-loop discs is designed to resist clogging and maintain cutting efficiency when working on wood, paint and varnish removal, and surface smoothing. These discs are suitable for intermediate sanding steps in both DIY and professional projects where a balance between material removal and surface finish is required.

Advantages

Anti-clog abrasive formulation reduces loading and extends useful life of each disc while preserving cutting performance. The 150 grit offers medium-coarse abrasion that removes old coatings and levels surfaces without overly aggressive material removal. Hook-and-loop backing ensures quick attachment and replacement on compatible sanders, improving work flow. The 125 mm diameter fits a wide range of compact sanders used for spot work and edge sanding.

Suitable for

• Surface preparation of wood prior to finishing
• Removing paint and varnish layers
• Intermediate sanding between finishing coats
• Smoothing edges and small flat areas with orbital or rotary sanders
• General DIY and light professional refurbishment tasks

Key specifications

• Diameter: 125 mm
• Abrasion grade: 150 grit (medium-coarse)
• Attachment: hook-and-loop backing for fast change
• Anti-clog formulation to reduce loading and extend disc life
• Pack quantity: set of 5 discs

How to use

Ensure the sander is compatible with 125 mm hook-and-loop discs and disconnect power before changing accessories. Align the disc with the backing pad and press firmly to secure. Start sanding with light to moderate pressure, allowing the disc to do the work; excessive pressure can reduce performance and shorten disc life. Use steady, overlapping passes and check the surface frequently to avoid over-sanding. Replace the disc when cutting efficiency decreases or the abrasive surface becomes worn.

Usage recommendations

For best results, keep the sanding area clean and use dust extraction if available. Start with the 150 grit to remove coatings or level surfaces, then progress to finer grits for a smoother finish. Store discs flat in a dry environment to preserve backing adhesion and abrasive properties.