Manual sanding strip Dedra DED79491 — 75 mm x 533 mm, 1 pc

Manual sanding strip Dedra DED79491 — 75 mm x 533 mm, 1 pc is a hand sanding tool designed for smoothing and preparing flat and edged surfaces. The single-piece strip provides a ready-to-use abrasive surface suitable for working on wood, painted surfaces, putty and similar materials. Its 75 mm width and 533 mm length balance reach and control for detail sanding and small-scale renovation tasks.

Advantages

The sanding strip offers a simple, low-cost solution for manual finishing without the need for power tools. Its elongated shape allows even pressure distribution across the working surface, helping to achieve consistent results on edges and flat areas. Supplied as a single unit, it is lightweight and easy to handle for extended manual work. The format is suitable for both rough material removal and finer smoothing, depending on the abrasive grade used.

Suitable for

• Sanding and smoothing wooden surfaces
• Preparing painted or varnished surfaces for repainting
• Trimming and levelling putty or filler
• Detail finishing on furniture and interior elements

Key specifications

• Working width: 75 mm
• Length: 533 mm
• Quantity: 1 piece
• Hand-operated sanding format for manual control
• Suitable for use with various abrasive grits (depending on need)

How to use

Select an appropriate abrasive grit for the task, attach or wrap the abrasive to the strip if required, and hold the sanding strip with a firm, even grip. Move the strip along the surface with steady, overlapping strokes following the grain on wood or across flat painted areas to remove loose material, smooth edges, or refine filler. Apply light to moderate pressure—avoid excessive force that could gouge the substrate. Clean or replace the abrasive when worn to maintain effective sanding performance.

Usage recommendations

For best results, start with a coarser grit to remove high spots or old finishes, then progress to finer grits for a smooth finish before priming or painting. Use a sanding block or backing support if a perfectly flat finish is required, and always wear appropriate personal protective equipment such as dust masks and eye protection when sanding.