Angle grinder accessory Dedra H1206 — 18 cm diameter, 1 pc

Dedra H1206 is an angle grinder accessory with an 18 cm (180 mm) diameter supplied as a single piece. It is intended for use with compatible angle grinders and can be fitted according to the required attachment type to perform cutting, grinding or surface-preparation tasks. The accessory is suitable for both DIY and professional settings where an 18 cm disc is required for effective material removal or finishing.

Advantages

The accessory offers a standardized 18 cm diameter that fits grinders designed for this disc size, enabling a balance between cutting depth and manoeuvrability. Supplied as a single piece, it is convenient for replacing worn discs or assembling a specific tooling setup. The product’s simple specification makes it easy to select and install without additional components when used with compatible quick-change or flange systems.

Suitable for

• General metal cutting and grinding tasks
• Surface preparation and removal of rust or paint when fitted with appropriate attachments
• DIY repair and renovation projects
• Light to medium professional workshop use requiring an 18 cm disc

Key specifications

• Diameter: 18 cm (180 mm)
• Quantity in pack: 1 piece
• Intended tool: angle grinder compatible with 180 mm discs
• Typical applications: cutting, grinding, surface preparation depending on attachment type

How to use

Ensure the angle grinder is disconnected from the power source before fitting the accessory. Verify that the grinder’s spindle and flange are compatible with an 18 cm diameter disc and mount the accessory following the grinder manufacturer’s instructions. Tighten the flange securely but avoid over-torquing. Select the appropriate speed and attachment type for the material and task. During operation, maintain a steady grip, use appropriate feed rates, and allow the disc to do the work without excessive pressure.

Usage recommendations

Use personal protective equipment including eye protection, gloves and hearing protection. Check the accessory for visible damage before each use and replace if worn or cracked. Operate at speeds and applications recommended by the grinder and accessory manufacturers and avoid lateral forces that the disc is not designed to withstand.