Circular saw blade Dedra H17040E, 170 mm diameter, 16 mm bore, for wood, 1 pc

Dedra H17040E is a 170 mm circular saw blade designed for cutting wood. The blade has a 16 mm bore and is supplied as a single piece. It is suitable for handheld and bench circular saws that accept a 170 mm diameter blade with a 16 mm arbor. The blade’s 40-tooth configuration provides a balance between cutting speed and edge finish for general woodcutting tasks such as rip cuts, crosscuts and panel trimming.

Advantages

The 170 mm diameter and 16 mm bore make this saw blade compatible with a range of compact circular saws and table saws. With 40 teeth, the blade produces smoother cuts than coarse-tooth blades while retaining adequate material removal rate. Being a single-piece supply simplifies replacement and inventory management. The blade is intended specifically for wood, which helps ensure appropriate tooth geometry and cutting performance for timber and panel products.

Suitable for

• Rip cuts in soft and hardwood
• Crosscutting boards and planks
• Trimming and sizing plywood, MDF and particleboard panels
• General carpentry and joinery tasks with compatible saws

Key specifications

• Diameter: 170 mm
• Bore (arbor) size: 16 mm
• Number of teeth: 40
• Material compatibility: Wood (solid timber and wood-based panels)
• Quantity: 1 piece

How to use

Install the Dedra H17040E blade on a circular saw or table saw with a matching 16 mm arbor and secure it according to the tool manufacturer’s instructions. Confirm correct blade rotation direction and ensure the saw is disconnected from power when fitting or removing the blade. Set the cutting depth and fence or guide for the intended cut, then perform cuts at steady feed rate appropriate for the wood species and thickness. Wear eye, hearing and respiratory protection as required by the working environment.

Usage recommendations

For best results, use this 40-tooth blade for general-purpose wood cutting where a balance between finish quality and cutting speed is needed. Maintain sharpness by avoiding cutting materials with embedded metal or abrasive contaminants. Inspect the blade for damage before each use and replace if teeth are chipped or the blade is warped.