Drill bit Dedra WDA38152 — diameter 38 mm, length 152 mm, for wood, 1 pc

Single Dedra WDA38152 drill bit for wood, with a diameter of 38 mm and an overall length of 152 mm. This cutter is designed to make large through-holes and recesses in solid timber and wood-based panels. Its solid cutting geometry and shank shape make it compatible with handheld drills and drill presses for renovation, carpentry, and general woodworking tasks.

Advantages

The 38 mm diameter enables efficient removal of material for door fittings, large dowel holes and recesses without multiple passes. The 152 mm overall length provides sufficient reach for thicker boards and allows complete through-drilling when mounted in standard chucks. Solid construction delivers stable cutting performance and helps maintain hole roundness and edge quality during repetitive use. Sold as a single piece for flexible selection when matching to existing tool sets.

Suitable for

• Drilling large through-holes in solid wood
• Creating recesses for hinges, fittings and hardware
• Working with plywood, MDF and particleboard
• Renovation and carpentry tasks requiring single large-diameter holes

Key specifications

• Diameter: 38 mm
• Overall length: 152 mm
• Material compatibility: wood and wood-based panels
• Quantity: 1 piece
• Intended use: handheld drills and drill presses

How to use

Secure the drill bit firmly in the chuck of a handheld drill or drill press and set the machine to an appropriate speed for hardwood or softwood. Mark the drilling position on the workpiece, clamp the workpiece to prevent movement, and align the bit perpendicular to the surface. Apply steady, even pressure and allow the bit to cut without excessive force; withdraw periodically to clear chips when drilling deep holes. After drilling, deburr the hole edges if required.

Usage recommendations

Use appropriate personal protective equipment: eye protection, hearing protection and dust mask when cutting. For prolonged life of the cutting edges, avoid overheating the bit by using moderate speed and clearing chips frequently. Use clamps or a backing board when drilling near the exit face to prevent splintering on thin panels.