Drill bit Dedra WDB03060, 3 mm diameter, 60 mm length, for wood, 1 pc

Dedra WDB03060 is a single 3 mm diameter, 60 mm long wood drill bit designed for general woodworking tasks. The bit is intended for use with handheld drills and drill presses and is suitable for drilling pilot holes, preparing holes for dowels and screws, and other light-to-medium wood drilling operations. It fits standard chucks and is supplied as one piece.

Advantages

The 3 mm diameter and 60 mm overall length provide a balance between precision and reach for common joinery and fixing tasks. Compatibility with standard chucks ensures easy mounting and quick replacement. The dedicated wood geometry supports clean chip removal and reduces tear-out when used at appropriate speeds and with correct feed pressure.

Suitable for

• Drilling pilot holes for screws in soft and hard wood
• Preparing holes for dowels and small wooden pins
• Light joinery and furniture assembly work
• Use with handheld drills and drill presses for woodworking

Key specifications

• Diameter: 3 mm
• Overall length: 60 mm
• Material compatibility: wood (soft and hard wood)
• Package quantity: 1 piece
• Mounting: fits standard drill chucks

How to use

Secure the drill bit in the chuck and tighten firmly before starting. Mark the drilling position on the workpiece and, if needed, use a center punch or awl to prevent bit walking. Begin drilling at low speed to establish the hole, then increase to a steady speed appropriate for the wood type. Apply consistent, moderate feed pressure and clear chips from the hole periodically for longer holes to maintain cutting efficiency.

Usage recommendations

For best results, select a drilling speed suitable for the wood species—lower speeds for hardwoods and moderate speeds for softwoods—and ensure the workpiece is clamped securely. Use masking tape over the exit point or back the workpiece with scrap to minimize tear-out. Inspect the bit regularly for wear and replace when edges become dull to maintain clean holes.