Drill bit Dedra WIT03265 — 3.2 mm diameter, 65 mm length, for metal, 1 pc

Dedra WIT03265 — 3.2 mm diameter, 65 mm overall length drill bit designed specifically for drilling metal. This single-piece cutter is intended for use in standard drill chucks and is suitable for creating precise through-holes and general metalworking operations in workshop repairs, fabrication and maintenance tasks where a small-diameter metal drill is required.

Advantages

The solid construction provides stable cutting performance and consistent hole quality. With a 3.2 mm diameter and 65 mm overall length, the bit offers reach for through-holes while remaining rigid enough for controlled drilling. Compatibility with standard chucks makes it easy to install in most cordless and corded drills, and the single-piece design reduces play and vibration during use.

Suitable for

• Drilling through-holes in thin to medium-thickness metal sheets
• Workshop repair and maintenance tasks on metal parts
• Fabrication and light metalworking projects
• Preparing pilot holes for tapping or screw insertion in metal

Key specifications

• Diameter: 3.2 mm
• Overall length: 65 mm
• Intended material: Metal
• Quantity: 1 piece
• Shank type: compatible with standard drill chucks

How to use

Secure the Dedra WIT03265 drill bit in a properly rated drill chuck and tighten to prevent slippage. Mark the drilling point on the metal surface and, if needed, use a center punch to create a small dimple for accurate start. Use appropriate cutting speed and feed for the metal type, apply steady pressure, and clear chips frequently. For cleaner holes and longer tool life, use cutting fluid or lubricant when drilling harder metals. After drilling, withdraw the bit while the drill is running at low speed to clear chips, then stop the tool before removing the workpiece.

Usage recommendations

For best results, select cutting speed and lubrication suitable for the specific metal (slower speeds and cutting oil for hardened steels, moderate speeds for mild steel and aluminum). Wear appropriate eye and hand protection, clamp the workpiece securely, and ensure the drill chuck and bit are tight before operation. Replace the bit when signs of dulling or excessive wandering appear to maintain hole quality.