Drill bit Dedra WIT07510 — 7.5 mm diameter, 109 mm length, for metal (1 pc)

Single Dedra WIT07510 drill bit with a 7.5 mm diameter and 109 mm overall length, designed for drilling metal. The solid, single-piece construction is intended for use in handheld drills or drill presses for metalworking tasks such as creating through-holes and pilot holes in steel and other ferrous materials. Supplied as one piece, this drill bit is shaped to deliver consistent hole dimensions when used at appropriate speeds and with suitable cutting fluids or lubrication.

Advantages

The Dedra WIT07510 offers precise 7.5 mm hole diameter control and a 109 mm overall length that gives extended reach for standard metalworking operations. Its design is focused on durability and straightforward use in common drilling equipment. The single-piece construction reduces the risk of component failure and supports stable drilling performance when combined with appropriate tool setup and correct feed rates.

Suitable for

• Drilling through-holes in steel and other ferrous metals
• Creating pilot holes for tapping or fastening operations
• Use in handheld electric drills for workshop and site work
• Use in drill presses for controlled, perpendicular holes

Key specifications

• Diameter: 7.5 mm
• Overall length: 109 mm
• Material suitability: metal (steel and other ferrous materials)
• Pack quantity: 1 piece

How to use

Secure the Dedra WIT07510 drill bit in the drill chuck and tighten firmly. Select a drill speed appropriate for the metal being worked; lower speeds for harder ferrous metals and higher speeds for softer metals. If possible, mark the drilling position and clamp the workpiece to prevent movement. Apply steady, even pressure when drilling and use cutting fluid or suitable lubrication to reduce heat and prolong bit life. Withdraw the bit periodically on deep holes to clear chips and prevent clogging.

Usage recommendations

For optimal results with the Dedra WIT07510, use a properly rated drill, matching speeds to the metal type, and apply cutting fluid during the operation. Always wear appropriate personal protective equipment and secure the workpiece before drilling.