Drill bit Dedra WM06510, 6.5 mm diameter, 101 mm length, for metal, 1 pc

Single Dedra WM06510 twist drill bit with a 6.5 mm cutting diameter and 101 mm overall length, designed specifically for drilling metal. This single-piece cutting tool is intended for use in handheld drills and drill presses to create through-holes and pilot holes in steel and other ferrous materials. Supplied as one unit for repair, fabrication and maintenance tasks where a medium-sized metal-drilling diameter is required.

Advantages

The Dedra WM06510 drill bit provides a consistent 6.5 mm hole size with an overall length of 101 mm for access to deeper or recessed drilling points. It is designed for metalworking applications and is compatible with standard drill chucks found on portable drills and drill presses. Supplied as a single piece, it is convenient for quick replacement and small-scale jobs without excess packaging or bulk sets.

Suitable for

• Drilling through-holes in steel sheets and metal plates
• Creating pilot holes for screws and fasteners in ferrous materials
• Maintenance and repair tasks on metal components
• Light fabrication and workshop use where a 6.5 mm hole is required

Key specifications

• Cutting diameter: 6.5 mm
• Overall length: 101 mm
• Intended material: metal (steel and other ferrous materials)
• Quantity: 1 piece
• Mounting: compatible with standard drill chucks

How to use

Secure the Dedra WM06510 drill bit in the drill chuck and tighten firmly. Mark the drilling point on the workpiece and, if necessary, use a centre punch to prevent wandering. Start drilling at low speed to establish the hole, then increase speed according to the drill and material. Use steady, moderate pressure and avoid forcing the bit. For thicker or harder metal, apply cutting fluid or lubricant to reduce friction and extend tool life. Withdraw the bit periodically to clear chips from the hole.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and gloves. Match drill speed and feed to the metal being drilled and apply cutting fluid when working with stainless or hardened steels. Store the bit dry and protected from damage to maintain cutting performance.