Painter's tape Deka Expert Blue 48 mm x 50 m (D-300-0013) – masking tape for clean edges

Deka Expert Blue painter's tape, 48 mm x 50 m, is a masking tape designed for achieving clean paint edges and protecting surfaces during painting and decorating. Its medium-width format and consistent adhesive balance make it suitable for temporary masking on walls, trim, glass and metal. The tape is intended for interior tasks and light exterior use where precise lines and minimal adhesive residue are required.

Advantages

The tape offers a reliable adhesion level that holds firmly during application yet removes cleanly without leaving significant residue when taken off within the recommended time. Its paper backing provides easy tearing by hand and accurate alignment along edges. The blue color enhances visibility against most work surfaces, allowing better control when outlining areas to be painted.

Suitable for

• Masking wall edges and baseboards for interior painting
• Protecting window frames and glass during trim painting
• Creating sharp paint lines on woodwork, metal and plaster
• Temporary surface protection during light renovation and decorating

Key specifications

• Width: 48 mm
• Length: 50 m
• Backing material: crepe/paper for hand-tearability
• Adhesive type: removable pressure-sensitive adhesive formulated for low-residue removal
• Recommended application: interior and light exterior use

How to use

Clean and dry the surface before applying the tape to ensure optimal adhesion. Unroll the required length and apply the tape firmly along the edge to be masked, smoothing it down to avoid gaps. Paint up to the tape edge and allow paint to dry according to paint manufacturer instructions before removing the tape. Remove the tape slowly at a low angle to minimize paint lift and achieve the cleanest possible line.

Usage recommendations

For best results, use the tape on surfaces at room temperature and remove within the timeframe recommended for removable masking tapes; prolonged outdoor exposure or contact with strong solvents may increase the risk of adhesive transfer. Test on a small inconspicuous area if surface sensitivity is a concern.