Outdoor wall light DELIGHT TRIO NESTOS, LED non-changeable bulb, aluminium/plastic, 230×150 mm, 230 V

DELIGHT TRIO NESTOS is an outdoor wall light with an integrated non-changeable LED module designed to provide practical illumination for entrances, terraces, façades and pathways. The fixture combines a die-cast aluminium housing in anthracite with a white cuboid light body in plastic, measuring 230×150 mm and weighing 885 g. The luminaire operates on 230 V AC, 50 Hz and is rated IP54 for protection against dust ingress and splashing water, making it suitable for typical outdoor mounting on house walls, porches or balconies. An integrated motion sensor activates the light when movement is detected and switches it off after the area is clear.

Advantages

The integrated LED delivers consistent warm-white illumination (approximately 3000 K) with a luminous flux around 1300 lm and an expected lifetime of up to 30,000 hours, reducing maintenance since the light source is non-changeable. The combination of aluminium and plastic produces a durable, weather-resistant housing while the IP54 rating ensures reliable operation in rain and damp conditions. Modern LED technology provides higher energy efficiency compared with traditional halogen lamps, lowering energy consumption by up to about 80% and producing less heat.

Suitable for

• Entrance doors and porches
• Terraces, balconies and patios
• Façade and wall accent lighting
• Pathways, driveways and garden routes

Key specifications

• Overall dimensions: 230 × 150 mm
• Housing materials: die-cast aluminium (anthracite) and plastic (white light body)
• Integrated LED power: 13 W
• Light colour temperature: 3000 K (warm white)
• Luminous flux: approximately 1300 lm
• Rated lifetime of light source: up to 30,000 hours
• Protection rating: IP54 (splash-proof)
• Supply voltage: 230 V AC, 50 Hz
• Integrated daylight/motion sensor (day/night sensor)
• Weight: approximately 885 g

How to use

Install the DELIGHT TRIO NESTOS on a vertical outdoor wall following local electrical regulations and with the power supply switched off. Connect the fixture to a 230 V AC supply and secure the mounting plate to a stable surface; ensure the motion sensor has a clear field of detection without obstructions. After installation, restore power and test the sensor in low-light conditions to confirm automatic switching. Because the LED is non-changeable, service involves cleaning the housing and checking connections; if the light source reaches the end of its life, replace the entire luminaire unit.

Usage recommendations

Position the luminaire at a height and angle that allow the motion sensor to cover the required area while avoiding direct exposure to sprinklers or strong artificial light that could impair sensor performance. For longer service life, clean the light body periodically with a soft cloth and avoid abrasive cleaners. Use the product in environments consistent with IP54 protection; do not install in locations submerged in water or exposed to high-pressure washing.