DELOCK HDMI to VGA adapter with 3.5 mm audio and USB power cable — model 61082

The DELOCK HDMI to VGA adapter with 3.5 mm audio and USB power cable (model 61082) converts a digital HDMI output to an analog VGA signal, allowing HDMI-equipped devices to connect to older VGA monitors, projectors or displays. The adapter integrates a separate 3.5 mm audio output for extracting audio from the HDMI source, and includes a USB power cable to supply additional power when required by the connected display. The compact single-unit design combines video conversion and audio extraction in one cable solution.

Advantages

The adapter provides a straightforward HDMI-to-VGA conversion without the need for multiple separate converters. Integrated 3.5 mm audio output enables connection to speakers or audio systems independently from the VGA video connection. The included USB power cable supplies extra power where the HDMI source cannot deliver sufficient current for active conversion, improving compatibility with a wider range of devices. Its plug-and-play operation requires no driver installation on most systems and the compact form factor is suited for mobile and fixed setups.

Suitable for

• Connecting laptops, mini PCs or media players with HDMI output to legacy VGA monitors or projectors
• Presentations where audio must be routed separately to external speakers or sound systems
• Temporary workspace setups that require adapting modern video outputs to older displays

Key specifications

• Input: HDMI (digital video and audio)
• Output: VGA (analog video) and 3.5 mm stereo audio output
• Power: USB cable for external 5 V power supply when required
• Signal conversion: active digital-to-analog conversion
• Connector types: standard HDMI plug, 15-pin VGA connector, 3.5 mm audio jack, USB-A power connector
• Compatibility: supports common HDMI resolutions downscaled to VGA-compatible analog signals

How to use

Connect the HDMI plug to the HDMI output of your source device, then connect the VGA connector to the VGA input of the monitor or projector. Plug the 3.5 mm audio jack into speakers or an amplifier to route audio separately. If the display or the adapter requires additional power, connect the USB power cable to a USB power supply or an available USB port on the source device. Power on the display and source device; the adapter performs the conversion automatically and typically requires no driver installation.

Usage recommendations

For stable video and audio transmission, use short, high-quality VGA and HDMI cables where possible and connect the USB power cable if image flicker or no signal appears. Verify the source device’s output resolution and set it to a resolution supported by the target VGA display to ensure correct image scaling. Avoid exposing the adapter to excessive heat or moisture and disconnect power before plugging or unplugging connectors.