Filament devil design ABS+ 1.75 mm 0.8 kg — red spool for 3D printing

Devil Design ABS+ filament in 1.75 mm diameter on a 0.8 kg red spool is a thermoplastic material developed for FDM/FFF 3D printers that accept 1.75 mm filament. This ABS+ formulation provides the typical mechanical strength and thermal resistance of ABS with improved dimensional stability and layer adhesion compared with standard ABS. The red spool is suitable for producing functional parts, prototypes and components that require impact resistance and elevated temperature performance when printed under recommended settings with a heated bed.

Advantages

The filament offers enhanced strength and heat resistance characteristic of ABS+, promoting durable prints for functional applications. Improved flow and consistent diameter help reduce extrusion issues and support reliable layer bonding. The 0.8 kg spool format is convenient for medium-size jobs and trial runs while the red color delivers visible, uniform finish for parts where color identification or aesthetics are important.

Suitable for

• Functional prototypes and mechanical components
• Parts requiring higher heat resistance than PLA
• Enclosures, brackets and fixtures
• Educational and workshop projects using FDM/FFF printers

Key specifications

• Material type: ABS+ thermoplastic suitable for FDM/FFF printing
• Filament diameter: 1.75 mm
• Spool weight: 0.8 kg
• Color: red
• Compatibility: printers supporting 1.75 mm filament

How to use

Load the 1.75 mm filament into an FDM/FFF printer designed for this diameter. Use a heated bed and set extrusion temperatures in the ABS-compatible range appropriate for ABS+ materials; adjust print speed, fan settings and retraction to match your printer and model geometry. Ensure good bed adhesion through a suitable build surface or adhesive aid and allow adequate cooling and post-processing time after printing. Dry filament before use if it has been stored in humid conditions to avoid printing defects.

Usage recommendations

For best results, print with a heated bed (typically above 80°C depending on printer and model), use an enclosed or draft-free printing environment to reduce warping, and calibrate extrusion and bed leveling before production runs. Store the filament in a dry place or sealed container with desiccant to preserve print quality.