Filament spool devil design ABS+ 1.75 mm 0.8 kg — Gray

devil design ABS+ 1.75 mm filament on a 0.8 kg spool in gray is a thermoplastic filament formulated for FDM/FFF 3D printers. Designed to deliver improved strength and dimensional stability compared to basic ABS, this ABS+ material is suitable for printing functional prototypes and mechanical parts that require post-processing such as sanding, gluing and painting. The filament comes in a standard 1.75 mm diameter compatible with most desktop and hobby 3D printers and is supplied on a compact spool for convenient feeding.

Advantages

The ABS+ composition provides enhanced impact resistance and reduced warping relative to conventional ABS, helping maintain part dimensions during cooling. Its surface finishes well for sanding and accepts common adhesives and primer/paints, facilitating post-processing workflows. The 1.75 mm diameter ensures consistent extrusion and compatibility with a wide range of hotends and extrusion systems.

Suitable for

• Functional prototypes and concept models
• Mechanical parts, housings and fixtures
• Objects requiring sanding, painting or bonding
• Applications needing higher strength and dimensional stability

Key specifications

• Material: ABS+
• Diameter: 1.75 mm
• Spool weight (filament): 0.8 kg
• Color: Gray
• Printing technology: FDM/FFF

How to use

Load the 1.75 mm ABS+ filament into a compatible FDM/FFF printer according to the printer manufacturer's instructions. Use typical ABS printing settings: heated bed, appropriate extrusion temperature for ABS+ (refer to printer and material guidelines), and enclosure or controlled ambient temperature to reduce warping. Print with calibrated extrusion and retraction settings to ensure consistent flow and layer adhesion. After printing, allow parts to cool gradually before removing from the bed to minimise distortion.

Usage recommendations

For best results, print on a heated bed with adhesion aids such as ABS slurry, PEI sheet, or compatible adhesive, and consider an enclosure to stabilise ambient temperature. Post-process printed parts by sanding with progressively finer grits, then use suitable primers and paints or recommended adhesives for assembly.