Filament Devil Design PLA 1.75 mm 1 kg spool — Hot Red

PLA 1.75 mm filament by devil design on a 1 kg spool in Hot Red is a standard-diameter thermoplastic filament intended for FDM/FFF 3D printers that accept 1.75 mm material. This PLA offers straightforward printing behaviour, low tendency to warp and stable dimensional results, making it suitable for a wide range of general-purpose prints including prototypes, decorative pieces, models and everyday functional objects where biodegradability and ease of use are desired.

Advantages

The filament provides consistent extrusion with minimal stringing when proper print settings are used, and its low shrinkage helps maintain part accuracy. Hot Red colour delivers high visual contrast and good surface appearance without special post-processing. As a PLA material it is easier to print than many engineering plastics, requiring no heated chamber and performing well on most standard heated beds.

Suitable for

• Rapid prototyping and concept models
• Decorative items, figurines and display pieces
• Functional household parts with moderate mechanical demands
• Educational projects and beginner-friendly prints

Key specifications

• Diameter: 1.75 mm nominal for use in printers accepting 1.75 mm filament
• Spool weight: 1 kg net filament weight
• Material: Polylactic acid (PLA)
• Colour: Hot Red
• Compatibility: FDM/FFF printers with 1.75 mm filament path
• Printing behaviour: low warp, good dimensional stability

How to use

Load the 1.75 mm filament into a compatible FDM/FFF printer following the machine manufacturer's instructions. Typical print settings for PLA are nozzle temperatures around 190–220 °C and a heated bed temperature between 40–60 °C if available. Use appropriate retraction settings to reduce stringing and print at moderate speeds to ensure consistent layer adhesion. Store the spool in a dry place or sealed container with desiccant when not in use to maintain filament quality.

Usage recommendations

For best results calibrate extrusion multiplier and first-layer height before printing critical parts. Begin with manufacturer-recommended temperature ranges and adjust in small increments to optimise surface finish and interlayer adhesion. Avoid prolonged exposure to high humidity; drying the filament at low temperature can restore printability if moisture is absorbed.