Filament spool, devil design ASA 1.75 mm 0.8 kg — Bright Orange

devil design ASA filament, 1.75 mm diameter on a 0.8 kg spool in Bright Orange is a thermoplastic material formulated for FDM/FFF 3D printing. ASA (Acrylonitrile Styrene Acrylate) combines mechanical strength with improved UV and weather resistance compared to standard ABS, making this filament suitable when outdoor durability and dimensional stability are required. The filament is intended for printers that accept 1.75 mm filament and offers the layer adhesion and surface finish typical for ASA materials.

Advantages

This Bright Orange ASA filament delivers good dimensional stability and reliable layer adhesion, with resistance to UV light and outdoor weathering that helps printed parts retain appearance and mechanical properties over time. Its 1.75 mm diameter and consistent spool weight support stable feeding and predictable extrusion behavior on FDM/FFF machines. The material balances strength and machinability for functional parts while providing a color suited to visible housings and markers.

Suitable for

• Outdoor housings and enclosures exposed to sunlight and variable weather
• Functional prototypes and end-use parts requiring UV resistance
• Fixtures, jigs and mechanical components with moderate mechanical load
• Visual markers, signage and colored coverings where bright orange is desired

Key specifications

• Material: ASA (Acrylonitrile Styrene Acrylate)
• Filament diameter: 1.75 mm
• Spool weight: 0.8 kg of filament
• Color: Bright Orange
• Printing process: FDM/FFF
• Properties: UV and weather resistance, good dimensional stability, reliable layer adhesion

How to use

Load the 1.75 mm devil design ASA filament into a compatible FDM/FFF printer following the printer manufacturer's filament-loading procedure. Use print settings adapted for ASA, typically a higher nozzle temperature than PLA and a heated bed to reduce warping; consult material-specific temperature ranges from general ASA guidance and perform a short test print to fine-tune extrusion, retraction and cooling parameters. Ensure good bed adhesion using appropriate surfaces or adhesives and allow printed parts to cool gradually to minimise internal stress.

Usage recommendations

For best results when printing outdoor parts, use an enclosed or draft-free printing environment and a heated bed to reduce warping. Store the filament in a dry, cool place and keep it in a sealed container with desiccant when not in use to maintain consistent print quality.