Filament 1.75 mm 1 kg for 3D printing, devil design — Silk Super Green

Filament 1.75 mm 1 kg for 3D printing, devil design — Silk Super Green is a silk-finish thermoplastic filament supplied on a 1 kg spool and designed for FDM/FFF printers that accept 1.75 mm filament. The Super Green color delivers a glossy, satin-like surface that emphasises color fidelity and visible sheen. The material formulation provides consistent extrusion and layer adhesion suitable for decorative parts, prototypes and display models where an attractive surface appearance is required.

Advantages

The silk surface produces a subtle shine and smooth tactile feel without additional post-processing, reducing the need for polishing for many decorative applications. Uniform diameter and controlled tolerances promote reliable feeding and reduce print failures related to inconsistent filament cross-section. The formulation balances flowability and layer bonding to yield clear color saturation and defined surface details on printed objects.

Suitable for

• Decorative objects and display models
• Visual prototypes and concept models
• Cosmetic housings and decorative covers
• Figurines and gifts with satin/gloss finish

Key specifications

• Nominal diameter: 1.75 mm
• Spool weight: 1 kg (net filament)
• Finish: silk / satin glossy
• Color: Super Green
• Compatibility: FDM/FFF printers supporting 1.75 mm filament
• Recommended extrusion behavior: smooth flow and good layer adhesion

How to use

Install the spool on the printer so the filament feeds freely into the extruder. Select printing temperatures and speeds appropriate for the printer and nozzle size, and perform a short test print to verify adhesion and surface appearance. Ensure the print bed is level and conditioned according to your printer’s preferred method. Monitor the first few layers to confirm proper extrusion and make small adjustments to temperature or flow rate if necessary to optimise the silk finish.

Usage recommendations

For best results, start with manufacturer-recommended nozzle temperatures for general-purpose PLA-like or silk filaments, then fine-tune in 5 °C increments. Use moderate print speeds to preserve surface sheen and reduce stringing. When precise colour matching or the highest gloss is required, experiment with retraction and cooling settings and consider light sanding followed by a clear coat for enhanced shine.