Filament Startpack PLA 1.75 mm by devil design — 6 × 0.33 kg silk PLA spools

Filament Startpack PLA 1.75 mm by devil design — 6 × 0.33 kg silk PLA spools is a starter pack of PLA filament designed for FDM/FFF 3D printers that accept 1.75 mm filament. The set contains six spools, each with 0.33 kg of silk-finish PLA, providing a total of 1.98 kg of material. The silk surface gives printed parts a subtle lustre, making it suitable for prototypes, display models and decorative items where visual appearance is important. The filament is intended for general-purpose 3D printing with PLA-compatible hardware and standard hotend and bed settings for PLA.

Advantages

The pack offers a variety of silk-effect colours across six smaller spools that make filament management and colour selection easier during iterative design and prototyping. Silk PLA typically produces smooth surfaces with a mild sheen, reducing the need for post-processing when a polished appearance is desired. The 1.75 mm diameter is compatible with the majority of desktop FDM/FFF printers, and the smaller spool weight helps hobbyists and small workshops test multiple colours without large single-spool commitments.

Suitable for

• Rapid prototyping and concept models
• Decorative and display parts with a silk finish
• Small functional prints where standard PLA properties are acceptable
• Hobbyist projects and multi-colour experiments
• Educational workshops and demonstration prints

Key specifications

• Filament type: PLA (polylactic acid)
• Diameter: 1.75 mm
• Spool count: 6 spools
• Weight per spool: 0.33 kg
• Total material weight: 1.98 kg
• Surface finish: silk (semi-gloss)
• Recommended printer type: FDM/FFF desktop 3D printers compatible with 1.75 mm PLA

How to use

Load the 1.75 mm filament into a compatible extruder following your printer manufacturer's instructions. Use standard PLA print settings as a starting point; typical nozzle temperatures range from 190–220 °C and bed temperatures from 0–60 °C depending on your printer and model geometry. Adjust print speed, retraction and cooling settings to suit the silk finish and to reduce stringing. When changing colours between spools, purge the nozzle until the previous colour is fully cleared to avoid colour contamination.

Usage recommendations

Store the spools in a dry environment away from direct sunlight and moisture to preserve print quality. For best surface results, enable part cooling and tune extrusion multiplier and layer height according to the model detail; use slower print speeds for fine features. Verify adhesion with small test prints before producing final pieces.