Filament spool Devil Design PLA 1.75 mm 1 kg — Dark Violet

Devil Design PLA filament in 1.75 mm diameter and a 1 kg spool provides a standard, general-purpose material for FDM/FFF 3D printers. The Dark Violet color gives prints a deep purple tone suitable for visible parts, prototypes and decorative objects. This PLA filament is compatible with printers that accept 1.75 mm PLA and follows the typical PLA printing workflow: easy extrusion, low warping and straightforward post-processing for sanding or painting.

Advantages

This 1.75 mm Devil Design PLA offers consistent diameter and reliable layer adhesion for predictable print results. The material has low odor and reduced tendency to warp compared with higher-temperature thermoplastics, making it suitable for desktop printers. The dark violet pigment provides uniform coloration across layers and good surface finish for visual prototypes and display pieces.

Suitable for

• Visual prototypes and concept models
• Hobby and decorative prints (figurines, ornaments, casings)
• Functional parts with moderate mechanical demands
• Educational projects and classroom printing

Key specifications

• Material: Polylactic Acid (PLA)
• Diameter: 1.75 mm nominal
• Net weight: 1 kg spool
• Color: Dark Violet
• Form: Filament on spool compatible with standard FDM/FFF feeders

How to use

Load the 1.75 mm Devil Design PLA filament into the feeder of a compatible FDM/FFF 3D printer following the printer manufacturer’s instructions. Recommended printing settings for PLA are typically a nozzle temperature in the range of 190–220 °C and a heated bed temperature of 20–60 °C or use no heated bed depending on the printer and adhesion method. Use standard print speeds and layer heights appropriate to the model complexity, and allow prints to cool before removal to reduce deformation. Trim the filament end and ensure the spool unwinds smoothly to avoid tangles during long prints.

Usage recommendations

Store the spool in a dry environment away from direct sunlight and moisture. If printing fine details or large flat surfaces, enable cooling fans and consider a brim or raft to improve first-layer adhesion. For painting or smoothing, lightly sand and apply compatible primers or coatings designed for PLA.