Jigsaw blade DeWalt DT2053‑QZ — HCS wood blades, 73 mm working length, 2.5 mm tooth pitch, 5 pcs

DeWalt DT2053‑QZ jigsaw blades are HCS (high carbon steel) blades engineered for straight and curved cuts in a variety of wood types. Each blade provides a 73 mm working length and an overall length of 100 mm, with a 2.5 mm tooth pitch that balances cutting speed and edge finish. The set contains five identical blades intended for general wood cutting tasks, renovation work and on‑site carpentry where a reliable, economical blade is required.

Advantages

High carbon steel construction gives the blades good flexibility and resistance to chipping when cutting soft and common hardwoods. The 2.5 mm tooth pitch offers a compromise between fast material removal and controlled, relatively smooth cuts. A 73 mm working length allows cutting depths up to 40 mm, suitable for most single‑piece wood panels and common construction timber. The pack of five ensures convenient replacement and continuity of work without frequent trips to resupply.

Suitable for

• Crosscuts and rip cuts in softwood and common hardwood
• Cutting particleboard, plywood and laminated panels
• On‑site carpentry and renovation trimming tasks
• General purpose jigsaw work where HCS blades are preferred

Key specifications

• Material: high carbon steel (HCS)
• Working length: 73 mm
• Overall length: 100 mm
• Tooth pitch: 2.5 mm
• Maximum cutting thickness: up to 40 mm in wood
• Quantity: 5 blades per pack

How to use

Install the blade in the jigsaw following the tool manufacturer's instructions, ensuring the tooth orientation matches the intended cutting direction. Secure the blade in the tool's clamp and check that it is seated correctly before powering the jigsaw. Use steady feed pressure and allow the blade to cut at its own pace; forcing the blade can cause premature wear or breakage. For straighter cuts, guide the jigsaw along a straightedge; for curves, follow marked lines with controlled speed. Replace blades when cut quality decreases or when teeth show visible wear.

Использование и уход

Store blades dry to prevent surface corrosion and keep spare blades in the original packaging until needed. For prolonged life, avoid cutting metals or abrasive materials with HCS wood blades.