Diamond cutting disc Diam 350 x 25.4/10 TB85 laser, standard (DITB85350/25)

Diamond cutting disc Diam 350 x 25.4/10 TB85 laser, standard is a 350 mm external diameter diamond blade with a dual bore 25.4/10 mm mounting interface and TB85 segment design secured by laser welding. Designed for high-speed cutting, this disc is intended for use on angle grinders and single-disc machines where precise, efficient removal of material is required. The diamond segments provide consistent cutting performance on concrete, natural stone and other similarly hard construction materials.

Advantages

The laser-welded segments ensure durable attachment and reduced risk of segment loss during heavy-duty operation. The TB85 segment geometry balances aggressive cutting speed with controlled chip removal, resulting in efficient material penetration and extended segment life. The dual bore 25.4/10 mm mounting allows compatibility with a wide range of machines and adapters, while the 350 mm diameter offers a good compromise between cutting depth and machine handling.

Suitable for

• High-speed cutting of reinforced and plain concrete
• Cutting natural stone, granite and marble
• Construction site cutting tasks and on-site refurbishment
• Precutting and trimming of masonry blocks and pavers

Key specifications

• Outer diameter: 350 mm
• Mounting bore: 25.4/10 mm (dual bore)
• Segment type: TB85 diamond segments
• Attachment method: laser welded segments
• Application: dry and wet cutting on hard construction materials

How to use

Select a machine compatible with a 350 mm blade and the dual bore adapter if required. Mount the disc following the machine manufacturer's instructions, ensuring the rotation direction marked on the blade matches the machine. Use appropriate clamping and check that the blade runs true before cutting. For best results, start cuts at steady speed, apply even pressure without forcing the blade, and allow the diamond segments to wear in gradually. Observe all safety measures, including proper guards, eye and hearing protection, and dust control.

Usage recommendations

Use suitable personal protective equipment and ensure adequate cooling or dust suppression where required. For heavily reinforced concrete, use progressive feed rates and, if possible, wet cutting to reduce dust and extend blade life. Store the disc flat in a dry place and inspect for damage before each use.