Diamond Cutting Disc Distar ELITE Turbo 180 x 2.4 x 22.23 mm for wet and dry cutting

Distar ELITE Turbo diamond cutting disc 180 x 2.4 x 22.23 mm is a thin, high-speed blade designed for cutting a variety of mineral materials. The turbo segment rim combines continuous and serrated profiles to accelerate cutting progress and help clear debris from the kerf. This disc fits angle grinders and circular saws with a 22.23 mm arbor and is specified for both wet and dry cutting depending on the machine and the work conditions.

Advantages

The turbo rim geometry provides faster penetration and improved slag removal compared with continuous rim blades, reducing cutting time on stone, concrete and tile. The 2.4 mm blade thickness delivers a balance between speed and minimal material loss while maintaining structural rigidity. Compatibility with a 22.23 mm bore makes it suitable for common professional and DIY angle grinders and saws. The disc is manufactured for high rotational speeds, allowing efficient cutting in demanding applications when used within the tool's rated RPM and with appropriate safety measures.

Suitable for

• Cutting natural stone (granite, marble) with proper cooling when required
• Cutting concrete and reinforced concrete (with care and correct feed)
• Cutting ceramic and porcelain tiles
• Trimming masonry and brickwork

When it may not be suitable

This disc is not intended for cutting ferrous metals such as steel or iron; using it on metal may cause rapid wear or unsafe conditions. Very thin or fragile tiles that require an ultra-fine finish may be better served by a continuous rim blade to avoid chipping. Also avoid exceeding the maximum RPM rating of your power tool or the disc.

Key specifications

• Diameter: 180 mm
• Blade thickness: 2.4 mm
• Arbor bore: 22.23 mm
• Rim type: Turbo segmented diamond rim
• Application: wet and dry cutting of stone, concrete, tile and masonry (depending on equipment and material)

How to use

Install the disc on an angle grinder or circular saw with a 22.23 mm arbor following the tool manufacturer’s instructions and ensuring the disc rotation direction matches the tool. Secure the blade with the correct flange and torque. For dry cutting, use steady, moderate feed pressure to avoid overheating; allow the diamond segments to work and do not force the disc. For wet cutting, use an appropriate water supply to cool the blade, reduce dust and extend blade life. Always wear eye, hearing and respiratory protection and use guards and anti-kickback measures on the tool.

What to consider before purchase

• Verify your tool’s arbor size is 22.23 mm and that the tool’s maximum RPM does not exceed the disc rating
• Decide whether you will primarily perform wet or dry cutting and confirm compatibility
• Match the rim type (turbo) to your need for faster cutting versus the finest edge finish
• Ensure your tool has sufficient power for cutting the intended material

Usage recommendations

Use the Distar ELITE Turbo disc with controlled, steady feed and appropriate cooling for longer blade life. For durable materials such as granite or reinforced concrete, consider intermittent cutting strokes and water cooling to reduce heat build-up. Replace the disc when the diamond segments are worn down or cutting performance decreases.