Diamond Cutting Disc Distar 250x1.6x10x25.4 for Hard Ceramics

Diamond cutting disc Distar 250x1.6x10x25.4 is designed for cutting hard ceramics with a thin kerf and a standard 25.4 mm bore. The blade’s 250 mm diameter and 1.6 mm cutting width provide precise, narrow cuts suitable for brittle ceramic tiles and similar materials. It is compatible with angle grinders and tile saws that accept a 25.4 mm arbor and is intended for both professional tradespeople and informed DIY users who need accurate edge quality and reduced material loss.

Advantages

The diamond segment construction ensures effective cutting of hard ceramics while maintaining durability and consistent performance. The thin 1.6 mm cutting width minimises chip-out and reduces waste, enabling more precise joints and fitment. The standard 25.4 mm bore allows straightforward mounting on common power tools, and the 250 mm diameter gives a balance between cutting depth and stability for controlled operation.

Suitable for

• Dry and wet cutting of hard ceramic tiles
• Trimming and profiling tile edges for installation
• Cutting brittle porcelain and glazed ceramic slabs
• Use with angle grinders and tile saws with a 25.4 mm arbor

Key specifications

• Diameter: 250 mm
• Cutting width (kerf): 1.6 mm
• Segment height/type: rim type with diamond segments suitable for hard ceramics
• Bore (arbor) diameter: 25.4 mm
• Recommended use: cutting hard ceramics and similar brittle materials

How to use

Mount the disc on a compatible angle grinder or tile saw with a 25.4 mm arbor and ensure the tool is unplugged or the battery removed during installation. Verify the disc rotation direction matches the tool’s directional arrow. Use appropriate feed rates and avoid applying excessive side pressure; allow the blade to cut at its intended speed. For best results with hard ceramics, use water cooling if the blade and tool support wet cutting to reduce dust and heat. Always inspect the disc before use for damage or wear and replace if segments are missing or the rim is compromised.

Usage recommendations

Use appropriate personal protective equipment: safety glasses, hearing protection, respiratory protection for dry cutting, and gloves. Follow the tool manufacturer’s speed and mounting instructions, and select cutting parameters (speed, feed, and cooling) according to the hardness and thickness of the ceramic material.