Diamond polishing disc Distar 100 mm P220 for grinder/polisher, grit P220

Diamond polishing disc Distar 100 mm P220 is designed for intermediate to fine polishing of hard surfaces with an angle grinder or dedicated polisher. The 100 mm diameter and P220 grit deliver a fine abrasive action suitable for smoothing and preparing surfaces for final finishing. This disc is intended for use on natural and engineered stone, concrete, ceramic tiles and similar materials where a consistent, fine polish is required.

Advantages

The Distar diamond polishing disc with P220 grit provides uniform abrasion and consistent removal of minor surface imperfections while preserving surface geometry. Its 100 mm size allows access to edges and small areas, making it practical for detailed work and spot repairs. The disc is engineered for stable performance on powered grinders and polishers, offering predictable material removal and a controlled polishing rate that supports intermediate-to-fine finishing stages.

Suitable for

• Polishing natural stone (granite, marble) to intermediate smoothness levels
• Smoothing and refining concrete and terrazzo surfaces
• Preparing ceramic and porcelain tiles for final finishing
• Edge work, spot repairs and small or confined areas

Key specifications

• Diameter: 100 mm
• Abrasive grit: P220 (fine)
• Intended use: dry and wet polishing compatible with angle grinders and polishing machines
• Material suitability: natural and engineered stone, concrete, ceramic tiles
• Design: diamond abrasive layer for controlled material removal and smoothing

How to use

Mount the 100 mm Distar diamond polishing disc securely on a compatible angle grinder or polisher according to the machine manufacturer's instructions. Start polishing at low speed to check the disc behavior and gradually increase speed as appropriate for the substrate. Apply even, moderate pressure and move the disc across the surface in overlapping passes to achieve uniform polishing. For best results on stone and concrete, alternate with coarser and finer grits as part of a multi-step polishing sequence until the desired smoothness is reached.

Usage recommendations

Use cooling water where applicable to extend disc life and reduce dust when the machine and disc are rated for wet use. Wear appropriate personal protective equipment including eye, hearing and respiratory protection. Test on a small, inconspicuous area before full application to confirm compatibility with the material and the expected finish.