Propeller Installation Kit for DJI Matrice 30 Series - 1676 High-altitude Propellers, Black/Yellow, 1 pc

The 1676 High-Altitude Propeller is an installation kit for the DJI Matrice 30 Series, supplied as a single propeller in black and yellow. It is designed to improve aerodynamic efficiency when the aircraft operates above 3,000 m and to raise the drone’s maximum achievable flight altitude up to 7,000 m. The kit is suitable for replacing damaged blades or preparing a Matrice 30 for missions that require better high-altitude performance.

Advantages

The propeller increases lift and aerodynamic efficiency at altitudes above 3,000 m, enabling a higher maximum flight ceiling of up to 7,000 m. Supplied in a single-piece pack, it is compatible with Matrice 30 Series airframes and can be used to replace worn or damaged blades. The black and yellow colouring allows for straightforward visual identification.

Suitable for

• DJI Matrice 30 Series drones requiring improved high-altitude performance
• Replacing damaged or worn propeller blades on Matrice 30 airframes
• Missions conducted primarily above 3,000 m altitude (surveying, inspection, research)

When it may not be suitable

This propeller is specialised for high-altitude flight and is recommended when operating above 3,000 m. For routine operations at lower altitudes the aerodynamic benefits will be minimal and you may not notice a performance difference compared with standard propellers. Also, compatibility is limited to the Matrice 30 Series; it should not be used on other airframe models.

Key specifications

• Compatibility: Matrice 30 Series
• Intended altitude range: Optimised for use above 3,000 m
• Maximum assisted flight altitude: up to 7,000 m
• Pack contents: 1 propeller
• Colour: Black and Yellow

How to use

Install the propeller on a DJI Matrice 30 Series aircraft following the manufacturer’s propeller replacement procedure and torque specifications. Ensure the aircraft is powered down and props are fitted in the correct orientation. After installation, perform a pre-flight check and a short hover test at low altitude to confirm correct mounting and balance before conducting high-altitude operations.

What to consider before purchase

• Verify compatibility with your Matrice 30 Series airframe
• Plan to use at altitudes above 3,000 m to achieve the intended benefits
• Consider keeping matching spare blades for balanced performance

Usage recommendations

Use these high-altitude propellers when flying the Matrice 30 Series in environments above 3,000 m, and always follow DJI’s installation and flight-check procedures. For safe performance, verify balance and condition of the propeller before each flight.