Angle bracket DMX KLR5 105×105×90×2.5 mm, 135° metal corner connector

DMX KLR5 105×105×90×2.5 mm, 135° metal corner connector is a rigid angle bracket designed to create a 135° joint between two structural members. Manufactured from sheet metal with a 2.5 mm wall thickness and precise right-hand dimensions of 105×105×90 mm, this bracket ensures consistent alignment and mechanical support where an obtuse corner connection is required. The component is suitable for fixed assemblies in construction, shelving, exhibition stands and general metalwork where a durable corner connector is needed.

Advantages

The DMX KLR5 angle bracket provides stable load transfer and helps maintain accurate geometry at 135° joints. Its 2.5 mm material thickness offers a balance of stiffness and ease of handling during installation. The compact geometry simplifies positioning and fastening, reducing the need for on-site trimming or bending. The bracket’s design supports repeated use in modular assemblies and contributes to improved structural alignment compared with makeshift or improvised connectors.

Suitable for

• Joining metal profiles and frames at a 135° angle
• Constructing shelving, cabinets and storage units with angled corners
• Assembling exhibition stands, displays and signage frameworks
• General metalwork and fabrication requiring fixed obtuse angle connections

Key specifications

• Bracket dimensions: 105 × 105 × 90 mm
• Angle: 135°
• Material thickness: 2.5 mm
• Material: metal sheet (steel)
• Finish: raw or factory-applied protective coating depending on batch

How to use

Position the DMX KLR5 bracket at the meeting point of the two members that require a 135° connection, ensuring faces align with the bracket flanges. Mark and drill fastening holes appropriate to the chosen bolt or screw size, then secure the bracket using bolts, screws or rivets. For best results, use washers and lock nuts where vibration or dynamic loads are expected. Confirm alignment with a protractor or angle gauge before final tightening and apply corrosion protection to cut edges if required for the environment.

Usage recommendations

Verify compatibility of fasteners with the base material and consider pre-drilling to prevent deformation. For outdoor or humid environments, select corrosion-resistant fasteners and add additional protective coating to exposed metal surfaces. Do not exceed recommended load limits for the assembly application; distribute loads across multiple brackets for higher structural demands.