Gate hinge DMX ZB 200x45x90x3.0 mm steel with brass finish

Gate hinge DMX ZB 200x45x90x3.0 mm is a strong, durable steel hinge with a brass finish, designed for mounting on various types of doors, gates and shutters. The hinge dimensions are 200 x 90 x 3 mm (profile 45 mm) with a material thickness of 3.0 mm, providing a stable pivot for gate leaves. The brass plating improves corrosion resistance and makes the hinge suitable for indoor use with occasional exposure to moisture (use class 2 according to PN-EN 1995-1-1:2010).

Advantages

This DMX ZB hinge combines sturdy steel construction with a brass finish for enhanced corrosion protection and an even appearance. Its 3.0 mm thickness and specified dimensions ensure reliable load-bearing and smooth swinging of gates. The product is easy to install on posts and frames and is appropriate for residential and light commercial applications where periodic moisture exposure may occur.

Suitable for

• Residential garden and driveway gates
• Light commercial gates and shutters
• Interior and covered exterior doors with occasional moisture
• Wooden or metal gate leaves mounted on posts or frames

Key specifications

• Brand: DMX
• Model / MPN: 8130532
• EAN: 5907708130532
• Dimensions: 200 x 45 x 90 mm (overall 200 x 90 x 3 mm)
• Material thickness: 3.0 mm
• Material: steel with brass finish (plating)
• Intended use class: suitable for indoor use with periodic moisture (PN-EN 1995-1-1:2010, class 2)

How to use

Position the hinge on the gate leaf and the post or frame according to the required pivot point and mark screw locations. Pre-drill holes if necessary, then fasten the hinge securely with appropriate screws or bolts for the gate material. Check alignment and movement; adjust fixings to achieve smooth swinging and correct clearances. Regularly inspect fastenings and the plated surface for signs of wear or corrosion and retighten hardware as needed.

Usage recommendations

For long service life, use fasteners appropriate for external or damp environments and perform periodic maintenance: clean the plated surface, lubricate the pivot if needed, and replace damaged fasteners. Avoid prolonged direct exposure to saltwater or highly corrosive atmospheres which may exceed the protection provided by the brass finish.