Hinge Gate DMX 500x40x110x4.0 mm Steel Brass for Gates and Doors

Hinge Gate DMX 500 x 40 x 110 x 4.0 mm is a heavy-duty steel hinge with brass components designed for mounting on gates, doors and shutters. The hinge is zinc-plated (galvanic zinc coating) to provide corrosion protection suitable for indoor environments with occasional exposure to moisture (use class 2 according to PN-EN 1995-1-1:2010). Dimensions: 500 x 40 x 110 mm, thickness 4.0 mm.

Advantages

The DMX hinge offers robust construction and stable pivoting thanks to its steel body and brass parts that reduce wear and improve corrosion resistance. The galvanic zinc coating adds an additional protective layer for environments with intermittent humidity. Its dimensions and 4.0 mm plate thickness provide reliable load support for residential and light commercial gates and doors.

Suitable for

• Residential gates and garden doors
• Light commercial doors and small shutters
• Wooden or metal gate leaves requiring a sturdy hinge

Key specifications

• Brand: DMX
• Model / MPN: 8130679
• EAN: 5907708130679
• Material: steel body with brass components
• Surface finish: galvanic zinc coating
• Dimensions: 500 x 40 x 110 mm
• Plate thickness: 4.0 mm
• Recommended use class: Class 2 (intermittent moisture) according to PN-EN 1995-1-1:2010

How to use

Position the hinge on the gate leaf and the fixed post so the pivot axis is aligned and the gate opens freely without binding. Mark and drill fastening holes appropriate for the hinge size and the material of the gate and post. Use suitable corrosion-resistant fasteners for outdoor mounting. Check alignment and tighten all fasteners evenly; test the gate movement and make final adjustments if necessary.

Usage recommendations

For extended service life, avoid continuous exposure to water and perform periodic inspections: lubricate the pivot points, check fastener tightness, and touch up the zinc coating if mechanical damage is detected.