Door stop with spring DMX ST 350 x 17.0 mm steel

Door stop with spring DMX ST is a steel door and gate stop, 350 mm long with a 17.0 mm diameter. It is designed to absorb impact, hold or limit door movement and reduce noise from door impacts. The stop attaches to the door or gate frame with four screws and is suitable for interior doors and light-duty exterior doors where a compact spring-mounted stopper is required.

Advantages

The spring-mounted design softens and dampens contact, reducing wear on door edges and frames while lowering noise. Steel construction provides strength and dimensional stability. With a length of 350 mm and a 17 mm diameter, the stop offers a robust contact area and straightforward, permanent mounting using four screws.

Suitable for

• Interior doors
• Garage doors and light gates
• Rooms where door impact noise should be reduced
• Locations requiring a compact, screw-mounted spring stop

Key specifications

• Material: steel
• Mounting: surface-mounted with four screws
• Length: 350 mm
• Diameter: 17.0 mm
• Mount type: spring-mounted stop to absorb impact and limit movement

How to use

Position the stop on the door or gate frame at the intended contact point and mark the four mounting holes. Pre-drill holes if required for the substrate, then secure the stop with appropriate screws. Ensure the spring is aligned with the direction of door movement so the stop compresses on impact. Check that the stop limits the door travel as intended and tighten screws fully for a stable installation.

Usage recommendations

Use corrosion-resistant screws or suitable fasteners for exterior or humid environments. Periodically inspect the spring and mounting screws for wear or loosening and tighten or replace components as needed to maintain reliable performance.