Angle bracket DMX KB1 100x75x30x3 mm — narrow beam connector

DMX KB1 angle bracket, dimensions 100×75×30×3 mm, is a narrow beam connector designed to join timber and profiles at right angles. Made of galvanized S235 steel with a 3 mm thickness, the bracket features offset hole placement to avoid repeated fastener alignment in the same wood fibres, reducing the risk of splitting. The product is suitable for light structural assemblies, shelving, frames and general carpentry where a compact right-angle reinforcement is required.

Advantages

The bracket is manufactured from galvanized S235 steel for corrosion resistance and durability. Its 3 mm material thickness and staggered hole layout increase joint strength and reduce the chance of wood splitting during installation. Preformed holes accept common fasteners, simplifying and speeding up assembly. A rated load capacity of 7.46 kN provides a clear performance indicator for planning and selection.

Suitable for

• Joining narrow beams and profiles at right angles
• Light structural frames and shelving supports
• Carpentry repairs and reinforcement of timber joints
• Applications using ø 4 mm and ø 6 mm fasteners

Key specifications

• Model: DMX KB1 (MPN: 8140159, EAN: 5907708140159)
• Material: Galvanized S235 steel
• Dimensions: 100 × 75 × 30 × 3 mm
• Thickness: 3 mm
• Suitable fasteners: carpentry anchor nails ø 4 mm, wood screws ø 4 mm and ø 6 mm
• Rated load capacity: 7.46 kN

How to use

Position the DMX KB1 bracket so its right-angle faces mate with the beam or profile surfaces to be joined. Use appropriately sized fasteners (carpentry anchor nails ø 4 mm or wood screws ø 4 mm/ø 6 mm) inserted through the preformed holes; staggered hole placement helps avoid concentrating fasteners in the same wood fibres. Ensure fasteners are driven straight and fully seated to achieve full bearing and the specified load performance.

Usage recommendations

For best results, select corrosion-resistant fasteners in line with the galvanized finish and use the bracket in light to medium-duty applications consistent with the 7.46 kN rating. Pre-drill timber where required to prevent splitting in very hard or dry wood.