Diamond cutting disc DNIPRO-M Ø76×10 mm — for precision cutting of hard materials

Diamond cutting disc DNIPRO-M Ø76×10 mm designed for precision cutting of hard materials such as ceramic tiles, porcelain, natural and engineered stone. The compact Ø76 mm diameter and 10 mm width deliver controlled cuts with reduced chipping and allow work in confined spaces and on small workpieces. The disc is intended for use with handheld grinders and small cutting tools where accurate, clean edges are required for both professional tradespeople and DIY enthusiasts.

Advantages

The diamond segmented rim and dense bond formulation ensure consistent cutting performance and extended life on abrasive, hard surfaces. Narrow 10 mm width reduces material waste and enables precise straight and curved cuts. Low-vibration construction and balanced design improve control during operation. The disc is compatible with common small grinders and cutting tools, providing predictable cutting depth and a clean finish without extensive secondary processing.

Suitable for

• Ceramic tiles and porcelain
• Natural stone (marble, granite) and engineered stone
• Small-format tile trimming and finishing tasks
• On-site repairs and renovation in tight areas

Key specifications

• Outer diameter: 76 mm
• Cutting width: 10 mm
• Cutting material: industrial diamond abrasive on a metal-bond rim
• Intended use: precision wet or dry cutting of hard brittle materials
• Compatibility: handheld grinders and compact cutting tools with appropriate arbor size

How to use

Mount the disc on a compatible grinder or cutting tool following the tool manufacturer’s instructions and ensure secure fastening. Inspect the disc for damage before each use and wear appropriate personal protective equipment, including eye protection, hearing protection and gloves. For best results on ceramic and stone, use steady, controlled passes and avoid excessive force; allow the blade to do the cutting. When possible, perform wet cutting or cooling to extend disc life and reduce dust. Maintain a stable workpiece and secure it to prevent movement during cutting.

Usage recommendations

Use moderate feed pressure and consistent cutting speed for clean edges and reduced chipping. Prefer wet cutting where applicable to improve life expectancy and minimize airborne dust. Replace the disc if noticeable wobble, cracking, or excessive wear appears.