Cut-off Wheel for Metal DNIPRO-M 125 x 6.0 x 22.23 mm

DNIPRO-M Cut-off Wheel for Metal 125 x 6.0 x 22.23 mm is an abrasive cutting disc designed for angle grinders that accept 125 mm diameter discs with a 22.23 mm bore. Engineered for cutting steel and other ferrous metals, the 6.0 mm thickness balances cutting speed and durability to deliver straight, controlled cuts in workshop, construction and metal fabrication environments. The wheel is suitable for both single-piece cuts and serial cutting tasks where consistent edge quality is important.

Advantages

The disc offers precise straight cutting performance with efficient material removal and predictable wear characteristics. Its thickness provides improved stability and reduced vibration compared with thinner discs, supporting safer operation and longer run times under moderate loads. The design is compatible with standard 125 mm angle grinders and mounting systems that use a 22.23 mm arbor, making it easy to fit and replace.

Suitable for

• Cutting steel rods, rebar and profiles
• Separating metal sheets and plates
• Trimming welded joints and removing excess material
• General metal fabrication and workshop cutting tasks

Key specifications

• Diameter: 125 mm
• Thickness: 6.0 mm
• Bore size: 22.23 mm
• Application material: ferrous metals (steel and similar)
• Tool compatibility: angle grinders designed for 125 mm discs

How to use

Mount the cut-off wheel on a properly rated angle grinder, ensuring the disc is compatible with the grinder’s maximum RPM. Secure the wheel with the correct flange and tighten according to the tool manufacturer’s instructions. Position the grinder at a steady angle and apply even pressure when cutting; avoid forcing the disc through the material. After each cut, allow the disc to slow down fully before setting the tool down. Inspect the wheel for cracks, chips or excessive wear before use and replace when damaged or worn beyond safe limits.

Usage recommendations

For safe and effective operation, use appropriate personal protective equipment including eye protection, gloves and hearing protection. Select an angle grinder with RPM rating equal to or exceeding the disc’s allowed speed and avoid side grinding that could stress the disc. Store discs flat in a dry area away from direct sunlight and sources of moisture to preserve abrasive integrity.