Grinding wheel for tiles and stone DNIPRO-M P200 100 mm

Diamond grinding wheel DNIPRO-M P200, 100 mm diameter, is designed for grinding and profiling ceramic tiles, natural stone and engineered stone surfaces. The P200 grit delivers medium-coarse abrasion for controlled material removal, edge levelling and surface preparation prior to polishing or adhesive application. The wheel is compatible with angle grinders that accept 100 mm disc mounts and is intended for use in renovation, tile installation and masonry tasks where shaping and smoothing of hard surfaces is required.

Advantages

The DNIPRO-M P200 grinding wheel combines diamond abrasive for durability and consistent cutting performance with a 100 mm diameter that offers a balance between access to tight areas and effective surface coverage. Its medium-coarse grit enables faster stock removal than fine abrasives while maintaining manageable control for profiling and edge work. The wheel’s design supports stable grinding with reduced vibration when used on appropriate angle grinders and gives predictable results across ceramic and stone materials.

Suitable for

• Shaping and levelling edges of ceramic wall and floor tiles
• Removing excess material and grout residues from tiles
• Profiling and smoothing edges of natural stone and engineered stone
• Surface preparation before polishing or adhesive bonding
• Small-scale renovation and masonry repair tasks

Key specifications

• Diameter: 100 mm
• Abrasive type: diamond
• Grit size: P200 (medium-coarse)
• Intended materials: ceramic tile, natural stone, engineered stone
• Tool compatibility: angle grinders with 100 mm disc mount

How to use

Mount the grinding wheel on an angle grinder with the correct 100 mm disc fitting and ensure the wheel is secured according to the grinder manufacturer’s instructions. Use appropriate rotational speed as recommended for diamond grinding wheels and start with light, steady pressure, moving the wheel evenly over the workpiece to remove material and shape edges. For profiling, make several shallow passes rather than removing large amounts in a single pass to maintain control and reduce heat buildup. Keep the workpiece and wheel free of heavy debris and stop periodically to inspect progress.

Usage recommendations

Wear suitable personal protective equipment including eye and hearing protection, dust mask or respirator, and gloves. Use water cooling or intermittent operation if recommended for the specific stone or tile to reduce dust and overheating. Verify compatibility with your angle grinder’s maximum RPM and follow all safety instructions from the tool manufacturer.