Hole saw DRAUMET bi-metal Ø83 mm for metal and wood, MPN 9032794

Bi-metal hole saw DRAUMET Ø83 mm (MPN 9032794) is made from HSS tool steel and M2 high carbon steel. It is designed for drilling holes in steel, stainless steel, non-ferrous metals, aluminium, wood and plastics. The tool has an M14 thread and uses a HEX mounting method; cutting depth is 34 mm.

Advantages

The bi-metal construction combines wear resistance of HSS with toughness of M2 high carbon steel, providing extended service life and reliable cutting performance. The M14 thread and HEX mounting ensure secure attachment to drills and quick installation. With an 83 mm diameter and 34 mm cutting depth, the hole saw suits medium-to-large through-holes in a variety of materials.

Suitable for

• Drilling holes in steel and stainless steel
• Cutting openings in non-ferrous metals and aluminium
• Creating holes in wood and wood-based panels
• Drilling through plastics and composite materials

Key specifications

• Brand: DRAUMET
• Model / MPN: 9032794
• EAN: 4750959032794
• Type: Bi-metal hole saw (HSS + M2)
• Diameter: 83 mm
• Cutting depth: 34 mm
• Thread / Mounting: M14 thread, HEX mounting
• Category: Drill Bits

How to use

Install the hole saw onto a compatible arbor or directly onto a drill with an M14/HEX adapter according to the drill manufacturer’s instructions. Mark the drilling position, clamp the workpiece if possible, and start at low speed to establish the cut. Apply steady pressure and moderate cutting speed; increase feed as the cut progresses. After drilling, retract the hole saw and remove chips from the cutting area.

Usage recommendations

Use cutting fluid or coolant when drilling ferrous and stainless steels to reduce heat and extend tool life. For clean edges in wood and plastics, use lower speed and avoid excessive feed force. Always wear appropriate personal protective equipment and secure the workpiece before drilling.