Wood preservative Drewnochron impregnant extra film-forming cedar 4.5L

Drewnochron impregnant extra film-forming cedar 4.5L is a water- and weather-resistant wood preservative in a cedar shade, supplied in a 4.5 litre container. Intended for both exterior and interior wooden surfaces, this film-forming impregnant provides surface protection while enhancing the natural appearance and grain of wood. It is formulated to form a durable coating that reduces moisture penetration and improves resistance to environmental effects on fences, cladding, garden furniture and other wooden elements.

Advantages

This film-forming impregnant creates a continuous protective layer that improves water repellency and reduces the impact of weathering. The cedar tint evens out colour variations and accentuates wood texture without obscuring grain details. The formulation is suitable for use on different types of construction and garden wood, offering practical protection against moisture and contaminants while facilitating cleaning and maintenance of coated surfaces.

Suitable for

• Exterior fence panels and gates
• Wooden cladding and siding
• Garden furniture and pergolas
• Interior wooden elements that require a film-forming protective coating

Key specifications

• Volume: 4.5 litres
• Finish type: film-forming
• Colour: cedar shade
• Intended surfaces: exterior and interior wood
• Main effects: water repellency and enhanced grain appearance

How to use

Apply the impregnant to clean, dry and dust-free wooden surfaces. Stir the product thoroughly before use. Apply with a brush, roller or low-pressure sprayer in even coats along the direction of the wood grain. For new or highly absorbent wood, apply a primer coat and allow sufficient drying time between coats according to ambient conditions. Make sure the surface temperature and humidity are within the manufacturer's recommended range for application. Allow the film to form and cure fully before subjecting the surface to heavy use or exposure to rain.

Usage recommendations

Perform a test application on a small inconspicuous area to check colour and absorption. For best results, maintain treated surfaces by periodic inspection and reapplication when signs of wear or reduced water repellency appear. Store the product in a cool, frost-free place and follow local waste-disposal regulations for any leftovers or containers.