Wood preservative impregnator Drewnochron Impregnat extra palisander medium 2.5 L

Drewnochron Impregnat extra palisander medium 2.5 L is a wood preservative and film-forming impregnator in a medium palisander shade for indoor and outdoor wooden surfaces. The product is formulated to penetrate wood fibres, reduce water absorption and leave a coloured protective layer that helps guard against moisture and surface wear. Packaged in a 2.5 L container, it is intended for treatment of fences, garden furniture, doors, cladding and other wooden elements where both protection and a decorative tone are required.

Advantages

The impregnator combines deep penetration with a film-forming finish, offering water resistance and visible colour uniformity. It helps reduce swelling and cracking by limiting moisture ingress, and the pigmented formulation provides UV protection to slow down surface greying. The product is suitable for use on a range of wood types and creates an even medium palisander tone while preserving wood texture.

Suitable for

• Exterior fences and gates
• Garden and patio furniture
• Wooden doors and window frames
• Cladding, siding and façades
• Interior wooden panels and decorative elements

Key specifications

• Type: film-forming impregnator and wood preservative
• Finish: pigmented, medium palisander tone
• Volume: 2.5 litres
• Application areas: interior and exterior wooden surfaces
• Protection properties: water resistance, penetration into wood fibres, UV-inhibiting pigment

How to use

Ensure the wood surface is clean, dry and free of loose paint, dirt, grease and fungal growth before application. Stir the product well before use. Apply evenly with a brush, roller or low-pressure sprayer following the wood grain. For highly absorbent or new wood, apply a first coat and allow sufficient drying time before applying a second coat to achieve uniform coverage and colour depth. Maintain recommended drying intervals and ventilation according to ambient conditions.

Usage recommendations

Test the product on a small inconspicuous area to confirm colour and absorption. Follow manufacturer guidance on surface preparation, drying times and number of coats. Store in original container, tightly closed, away from frost and direct sunlight. Use appropriate personal protective equipment during application and ensure adequate ventilation in enclosed spaces.