LED Floodlight with PIR Motion Sensor Eco Light 20W 1800 lm AC230V IP65 120° beam 4000K Neutral White Black

Eco Light LED Floodlight with PIR Motion Sensor 20W provides practical outdoor illumination with a neutral white 4000K color temperature and a luminous flux of 1800 lm. Designed for direct connection to AC 230V supply, the compact black housing and IP65 protection make this unit suitable for exposed exterior locations. The integrated PIR motion sensor activates the light when movement is detected within the sensor range, while the 120° beam angle delivers a wide, even spread of light for driveways, façades and garden areas.

Advantages

This LED floodlight combines energy-efficient LED technology and an integrated PIR motion sensor to reduce standby energy use by activating lighting only when needed. The neutral white 4000K output provides clear, natural color rendering suitable for security and task lighting. The IP65-rated enclosure protects against rain and dust, and the 120° beam ensures broad coverage with a single fitting. Simple AC 230V wiring supports direct replacement or new installations without additional drivers.

Suitable for

• Exterior security lighting for entrances, driveways and parking areas
• Illuminating building façades and signage
• Garden and pathway lighting where motion-activated illumination is preferred
• Temporary or permanent outdoor work areas requiring neutral white light

When it may not be suitable

This floodlight is not intended for use in fully submerged or wet interior locations where IP65 protection is insufficient. It does not include advanced lighting controls such as smart-home connectivity, dimming over a control line, or color tuning; applications requiring those features will need a different product. The integrated PIR sensor may be less effective in very high mounting positions or where line-of-sight is blocked by dense vegetation or obstructions.

Key specifications

• Power: 20 W
• Luminous flux: 1800 lm
• Input voltage: AC 230 V
• Color temperature: 4000 K (neutral white)
• Beam angle: 120°
• Ingress protection: IP65
• Housing color: Black
• Integrated sensor: PIR motion detector

How to use

Mount the floodlight on a stable exterior surface using appropriate fixings and route the AC 230V supply following local electrical regulations. Aim the fixture so the 120° beam covers the desired area and avoid pointing the sensor towards sources of heat or moving foliage. After connection, the PIR sensor will switch the light on when it detects motion within its coverage; check and adjust the mounting angle and mounting height to optimise sensor performance. Routine maintenance consists of occasional cleaning of the lens and checking seals to maintain IP65 performance.

What to consider before purchase

• Verify mains supply is AC 230V and compatible with fixed outdoor installation
• Confirm required light output and beam angle are sufficient for the intended area
• Check mounting height and line-of-sight for the PIR sensor to ensure reliable triggering
• Ensure IP65 protection level meets local weather exposure conditions

Usage recommendations

For optimal sensor performance, install the floodlight at a height that allows clear detection of pedestrian movement (typically 2–4 m) and avoid aiming the sensor at roads with frequent vehicle traffic if false triggers are a concern. Clean the lens periodically and inspect seals after severe weather to maintain long-term reliability.