LED power supply ECOLIGHT2 EC20125 20W 12V 1.67A IP67 for ceiling/push-box Ø60

ECOLIGHT2 EC20125 is a compact 20W LED power supply that delivers a regulated 12V DC output at up to 1.67A. The unit is designed for installation inside a Ø60 mm ceiling or junction box and features an IP67-rated enclosure for protection against dust and temporary immersion, enabling use in damp or protected outdoor locations as well as indoor installations. Its form factor and waterproof connection make it suitable for powering low-voltage LED strips, downlights and small lighting fixtures where a reliable, sealed supply is required.

Advantages

The ECOLIGHT2 EC20125 provides a stable 12V DC output with overcurrent protection characteristics typical for LED drivers, ensuring consistent illumination and helping to extend LED lifespan. Its IP67 protection rating and compact dimensions allow installation in confined ceiling or junction boxes where moisture resistance is needed. The device’s low-voltage output reduces installation complexity for LED systems and supports straightforward wiring to compatible fixtures.

Suitable for

• Powering 12V LED strips for accent, task or cabinet lighting
• Supplying small 12V downlights and recessed fixtures mounted in Ø60 ceiling/junction boxes
• Indoor damp areas such as bathrooms, kitchens, or utility rooms where moisture resistance is required
• Protected outdoor installations where temporary water exposure may occur (when installed according to local regulations)

When it may not be suitable

This power supply is limited to a maximum output of 20W and 1.67A, so it is not suitable for larger LED installations or systems that require higher voltages or currents. It is not intended as a standalone solution for permanently submerged applications despite its IP67 rating; correct placement inside a suitable junction box and proper cable sealing are necessary to achieve the intended protection. For fixtures requiring constant-current drivers or advanced dimming protocols, a dedicated driver that supports those functions should be selected.

Key specifications

• Output voltage: 12 V DC
• Maximum output power: 20 W
• Maximum output current: 1.67 A
• Ingress protection: IP67 (dust-tight and protected against temporary immersion)
• Mounting: designed for installation in Ø60 mm ceiling or junction box
• Typical application: low-voltage LED strips, small downlights and similar fixtures
• Typical dimensions suitable for limited-space installation (check physical fit in your box)

How to use

Install the ECOLIGHT2 EC20125 inside a Ø60 mm ceiling or junction box following applicable electrical codes. Switch off mains power before making connections. Connect the mains input wires to the AC supply using secure, insulated connectors and connect the 12V DC output to the LED load, observing correct polarity. Ensure cable glands or sealed connectors are used to maintain IP67 integrity where cables enter or exit the enclosure. After wiring, restore power and verify the LED load operates within the supply’s 20W/1.67A limits. If dimming is required, confirm compatibility between the LED fixtures and the power supply or choose a driver with a supported dimming method.

What to consider before purchase

• Confirm total LED load does not exceed 20W and 1.67A at 12V
• Verify physical fit inside your Ø60 mm ceiling or junction box and clearance for cable entry
• Ensure the IP67 rating is appropriate for the intended environment and that installation preserves sealing
• Check whether constant-voltage output is suitable for your LED fixtures or if a constant-current driver is required

Usage recommendations

For reliable performance, use the ECOLIGHT2 EC20125 to power 12V LED strips and small fixtures whose combined power stays below 20W. Maintain proper sealing of cable entries to preserve the IP67 rating, and install the unit in a suitable Ø60 mm box following local wiring regulations. If your project requires dimming or higher power, select an appropriate driver designed for those features.