LED driver ECOLIGHT2 EC79611 hermetic 150W white | constant-voltage LED power supply

Hermetic LED driver ECOLIGHT2 EC79611 delivers up to 150W of constant-voltage power in a sealed white enclosure. Designed to supply LED strips, modules and low-voltage fixtures, this compact power supply provides a protected, reliable source of 12V/24V (verify required output before installation) for installations where moisture, dust or temporary water exposure may occur. The robust hermetic housing reduces the risk of corrosion and ingress, making the unit suitable for indoor and outdoor mounting when fitted according to IP and thermal requirements.

Advantages

The sealed construction prevents dust and moisture from entering the electronics, increasing service life in challenging environments. Constant-voltage output ensures stable illumination for LED strips and modules without brightness fluctuations. The 150W power rating supports longer runs or multiple LED fixtures from a single supply, simplifying installation and reducing the need for multiple drivers. The white casing provides a neutral appearance that integrates unobtrusively into many installation locations.

Suitable for

• Powering 12V or 24V LED strips and tape lights (confirm nominal output before use)
• Low-voltage LED modules and small fixtures in kitchens, bathrooms or outdoor soffits
• Commercial accent lighting and signage requiring a sealed power supply
• Environments with dust, humidity or occasional splashes where a hermetic enclosure is preferred

When it may not be suitable

This LED driver is intended for constant-voltage applications; it is not suitable for LEDs or fixtures that require constant-current drivers. If a specific output voltage is required (for example strictly 12V or strictly 24V), confirm the unit’s nominal output before purchase and installation. The hermetic enclosure improves protection against moisture and dust, but correct installation, mounting position and heat dissipation must be observed to avoid overheating in confined spaces.

Key specifications

• Rated output power: 150W
• Output type: constant-voltage (suitable for voltage-specific LED loads)
• Enclosure: hermetic sealed housing, white finish
• Intended environments: protected indoor and outdoor use where moisture or dust is present
• Cooling: convection cooling; ensure adequate ventilation and mounting clearance

How to use

Mount the driver on a stable surface in a location that allows airflow around the enclosure and keeps connections accessible. Confirm the nominal output voltage of the unit and match it with the LED load (strip or module) voltage. Connect input AC supply to the driver following local wiring regulations and the product’s wiring diagram, and connect the LED load to the constant-voltage output terminals, observing polarity. After wiring, verify output voltage with a multimeter before connecting sensitive LED modules. Secure all cable entries to maintain the hermetic seal where applicable.

What to consider before purchase

• Confirm required output voltage (12V or 24V) and compatibility with your LED load
• Ensure total LED wattage does not exceed 150W and allow margin for reliability
• Check mounting location for adequate ventilation and protection from prolonged water immersion
• Verify local electrical codes and whether a protected or outdoor-rated conduit entry is needed

Usage recommendations

Install the driver with sufficient free space for convection cooling, avoid enclosed cabinets without ventilation, and route cables to preserve the enclosure’s sealed integrity. For long LED runs, plan voltage drop and distribute loads or use appropriate gauge wiring to maintain uniform brightness.