Air Impact Wrench Einhell TC-PC 45 Set

The Einhell TC-PC 45 pneumatic chisel hammer set with a matching needle scaler attachment is designed for demolition, renovation and surface cleaning tasks on stone and metal both indoors and outdoors. The kit includes a four-piece 120 mm chisel set, a needle scaler attachment, a small oil bottle, a nipple, a tensioning spring and a practical transport and storage case. The tool features a hexagon chuck and an ergonomic non-slip rubberized handle for safe operation. It is powered by compressed air, has a maximum operating pressure of 6.3 bar, an impact rate up to 4,500 min-1 and an impact energy of up to 1.2 joules.

Advantages

The pneumatic chisel hammer delivers high impact rate and consistent impact energy for efficient material removal. Its hexagon chuck secures bits reliably while the rubberized handle improves grip and reduces slippage. The set contains both chisels and a needle scaler attachment to expand the range of applications, and the supplied case keeps components organised for transport and storage.

Suitable for

• Removing mortar, tiles or small sections of masonry
• Chiselling and shaping metal parts
• Removing rust and scale from metal surfaces with the needle scaler
• Renovation and repair tasks in workshops, garages and construction sites

Key specifications

• Brand: EINHELL
• Model: TC-PC 45
• Operating pressure: max. 6.3 bar
• Impact rate: up to 4,500 min-1
• Impact energy: up to 1.2 J
• Recommended hose inner diameter: ≥ 9 mm
• Includes: 4 × 120 mm chisels, needle scaler attachment, oil bottle, nipple, tensioning spring, transport case
• Weight: 1 kg
• Colour: Black, Red

How to use

Connect the Einhell TC-PC 45 to a compressed-air supply using a hose with an inner diameter of at least 9 mm and ensure the supply pressure does not exceed 6.3 bar. Fit the required chisel or the needle scaler into the hexagon chuck and secure it. Hold the tool by the rubberized handle and position the chisel on the work surface. Start the air supply and apply controlled pressure to perform chiselling or scaling. After use, shut off the air, release remaining pressure and store the tool and accessories in the supplied case. Add a few drops of oil from the supplied bottle into the air inlet periodically to maintain air-tool lubrication.

Usage recommendations

Wear appropriate personal protective equipment (eye protection, gloves and hearing protection). Use a hose with at least 9 mm inner diameter and keep the operating pressure within specified limits. Regularly lubricate the tool via the air inlet and inspect chisels and the needle scaler for wear; replace worn parts to maintain safe and effective operation.