Circular Saw Einhell TC-CS 1410

The Einhell TC-CS 1410 circular saw is a 1,410 W handheld saw designed for clean, straight cuts in wood and similar materials. It comes with a Ø190 mm carbide saw blade installed and supports blades with a 30 mm bore. The saw offers tool-free adjustment of cutting depth and tilt angle, a spindle lock for straightforward blade changes, an integrated riving knife to prevent blade jamming, a dust extraction connection for cleaner work, and a softgrip handle for a secure hold during extended use. Maximum cutting depths are 67 mm at 90° and 46 mm at 45°.

Advantages

Tool-free adjustment of the saw blade depth and cutting angle allows quick setup on the job. The supplied high-quality carbide blade enables precise, clean cuts out of the box. The integrated riving knife reduces the risk of the blade pinching in solid wood, while the softgrip handle improves grip and control. A dust extraction port helps keep the work area cleaner and the spindle lock simplifies blade changes.

Suitable for

• Rip cuts and crosscuts in solid wood and panel materials
• Long, straight cuts where accuracy is required
• Workshop and site woodworking tasks requiring a portable circular saw

Key specifications

• Power: 1,410 W
• Blade diameter: 190 mm (Ø190 mm)
• Bore diameter: 30 mm
• No-load speed: up to 5,500 RPM
• Maximum cutting depth at 90°: 67 mm
• Maximum cutting depth at 45°: 46 mm
• Rated voltage: 220–240 V AC
• Weight: 4.33 kg

How to use

Set the desired cutting depth and tilt angle using the tool-free adjustment controls, then secure the settings. Connect a dust extractor to the dust port if available. Ensure the spindle lock is engaged when changing the blade and install a compatible Ø190 mm blade with a 30 mm bore. Hold the saw by the softgrip handle with a firm, two-handed grip and guide the saw along the cutting line at a steady feed rate. When making bevel cuts, verify the angle and cutting depth before starting the cut.

Usage recommendations

For the best results, use the supplied carbide blade for general wood cutting and switch to a blade with a tooth geometry suited to the specific material for finer finishes. Use a compatible guide rail for increased straightness and accuracy on long cuts, and always wear appropriate eye and hearing protection while operating the saw.