Power cable electro base NYY-J 5x6 0.6/1 kV — 5 cores 6 mm²

electro base NYY-J 5x6 0.6/1 kV is a multicore fixed installation power cable with five copper conductors each of 6 mm² cross-section. Designed for stationary indoor and outdoor wiring, the cable is rated for 0.6/1 kV and provides insulated conductors plus an outer sheath that protects against mechanical stress and common environmental influences. It is intended for power distribution, wiring to distribution boards and electrical equipment, and other fixed connections in residential, commercial and light industrial settings.

Advantages

The cable combines solid conductivity and mechanical robustness, offering stable current-carrying capacity and consistent insulation performance at rated voltage. Its five-core configuration simplifies multi-conductor runs to distribution points and equipment. The outer sheath increases resistance to abrasion and impact during installation and in service, while the insulated individual cores reduce the risk of short circuits and facilitate safer termination and connection.

Suitable for

• Fixed indoor electrical wiring and cable routes
• Outdoor fixed installation where UV exposure is limited or the cable is laid in protective conduits
• Power supply to distribution panels, junction boxes and industrial control cabinets
• Permanent connections for motors, generators and stationary equipment with five-core requirements

Key specifications

• Number of cores: 5
• Conductor cross-section: 6 mm² per core
• Rated voltage: 0.6/1 kV
• Conductor material: copper (solid or stranded as applicable for the product series)
• Insulation and sheath: PVC or comparable thermoplastic suitable for fixed installations
• Design: multicore fixed installation cable with outer protective sheath

How to use

Install the cable in accordance with local electrical codes and standards. Select appropriate cable glands, clamps and terminations sized for 6 mm² conductors. Route the cable through conduits, cable trays or along designated cable routes, avoiding sharp bends and mechanical damage. When making connections to distribution boards or equipment, strip insulation carefully to expose the conductor without nicking the copper, and tighten terminals to the recommended torque values. For outdoor runs, protect the cable from prolonged direct sunlight exposure or chemical contact if the sheath material is not rated for such conditions.

Usage recommendations

Before installation, verify the conductor type and local installation requirements, calculate expected current loads and apply correct overcurrent protection. Use cable supports at regular intervals and ensure terminations are made by qualified personnel to maintain electrical safety and long-term reliability.