Diamond Cutting Disc Ø230 x 22 mm, ELEKTROPLAST 56276

Diamond cutting disc Ø230 x 22 mm by ELEKTROPLAST is engineered for precise cutting of hard construction materials including concrete, masonry, stone and ceramic tiles. With a 230 mm diameter and 22 mm bore it fits angle grinders that accept this arbor size (use appropriate adapter where required). The disc features a segmented sintered diamond rim designed to provide efficient material removal, controlled cutting speed and reduced vibration during prolonged use.

Advantages

The segmented diamond rim combines cutting speed with durability, helping to maintain blade geometry under heavy loads. The sintered diamond bond improves segment life and resists wear from abrasive substrates. Reduced vibration characteristics support more accurate straight cuts and lower operator fatigue. The disc’s construction allows for consistent performance on reinforced concrete and other challenging materials.

Suitable for

• Straight or plunge cutting of concrete slabs and blocks
• Cutting masonry and brickwork
• Trimming and shaping natural and artificial stone
• Cutting ceramic and porcelain tiles

Key specifications

• Diameter: 230 mm
• Bore (arbor) diameter: 22 mm
• Rim type: segmented sintered diamond
• Intended use: dry cutting (verify machine and material compatibility)
• Compatible tool: angle grinder with matching arbor or adapter

How to use

Mount the disc on an angle grinder with the motor switched off and the battery removed or power disconnected. Ensure the disc flange and arbor are clean and that the disc is positioned according to the tool manufacturer’s rotation direction. Tighten the mounting nut to the specified torque without overtightening. During cutting, maintain a steady feed rate and avoid forcing the blade; let the diamond rim perform the cutting. Use short, controlled passes when cutting thick or reinforced materials. Allow the disc to cool periodically during extended cuts.

Usage recommendations

Wear appropriate personal protective equipment including eye, ear and respiratory protection. Follow the angle grinder and disc manufacturer’s safety instructions. For reinforced concrete or very dense stone consider using a wet cutting method or a disc specifically rated for wet use to reduce dust and improve cooling if compatible with the disc and the tool.