Spray zinc coating ELEKTROPLAST CX80 500 ml — corrosion protection, MPN 99.278

ELEKTROPLAST CX80 zinc spray in a 500 ml aerosol delivers a zinc-rich protective coating designed for sacrificial corrosion protection of steel and iron surfaces. The formulation is intended for maintenance and repair tasks such as spot repairs, weld seams, joints and exposed metal parts where a durable, metallic zinc layer reduces rust formation by acting as a galvanic anode. The spray is supplied in an easy-to-use aerosol for controlled application on small to medium areas in industrial, workshop or DIY environments.

Advantages

ELEKTROPLAST CX80 provides a uniform zinc layer that adheres to cleaned metal substrates, offering cathodic protection to areas vulnerable to corrosion. The aerosol format enables precise application to welds, seams and hard-to-reach spots without the need for special tools. Fast-drying properties allow for subsequent handling or overcoating, while the metallic finish restores conductive zinc coverage that can be welded or soldered after proper surface preparation.

Suitable for

• Touch-up and spot repair of rusted or scratched steel surfaces
• Protection of weld seams and joints against corrosion
• Coating exposed structural parts, brackets and fittings
• Maintenance in workshops, industrial facilities and DIY projects

Key specifications

• Volume: 500 ml aerosol
• Coating type: zinc-rich sacrificial coating
• Application method: spray/aerosol
• Finish: metallic zinc appearance
• Drying: fast-drying formulation suitable for overcoating

How to use

Prepare the surface by removing loose rust, dirt, grease and old flaking coatings; for best results, clean to a bright metal finish where possible. Shake the aerosol thoroughly before use and spray from a recommended distance (typically 20–30 cm) in even, overlapping passes to achieve a uniform layer. Apply several thin coats rather than one thick coat, allowing short flash-off times between coats. After drying, the coated area can be handled or overcoated with compatible paints if required.

Usage recommendations

Use in well-ventilated areas and follow standard safety precautions for aerosols: protect surrounding surfaces, avoid inhalation of spray mist, and keep away from open flames. Store the aerosol at moderate temperatures and protect from direct sunlight. For best corrosion protection, apply to clean, prepared metal and consider a topcoat if long-term aesthetic finish or additional barrier protection is required.