elpar N2XH-J 3x1.5 RE halogen-free power cable 0.6/1 kV B2ca

elpar N2XH-J 3x1.5 RE halogen-free power cable 0.6/1 kV B2ca is a low-voltage, three-conductor cable intended for fixed power distribution in buildings, industrial facilities and public spaces. Each conductor has a cross-sectional area of 1.5 mm², suitable for typical lighting and small-circuit power lines. The cable is manufactured without halogens and is classified B2ca for reaction to fire, offering reduced smoke emission and improved safety in fire situations.

Advantages

The cable combines a compact three-core design with halogen-free materials to reduce toxic gas release and corrosive residues in case of fire. Its B2ca classification indicates a high resistance to flame propagation, which helps limit fire spread in installations. The 0.6/1 kV voltage rating ensures compatibility with standard low-voltage systems, while the 1.5 mm² conductors meet common wiring requirements for lighting circuits and small appliances.

Suitable for

• Fixed internal electrical installations in residential, commercial and public buildings
• Powering lighting circuits and control circuits with 1.5 mm² conductors
• Installations where reduced smoke and no-halogen construction is required for safety
• Applications requiring cable with 0.6/1 kV voltage rating

When it may not be suitable

This cable is intended for fixed installations and is not designed for frequent flexing or mobile use. It is sized with 1.5 mm² conductors, so it may not be appropriate where higher current capacity is required, such as heavy-duty motors or large power feeders. For outdoor exposed runs, buried supply or installations requiring additional mechanical protection, alternative cable types or protective conduits should be considered.

Key specifications

• Number of cores: 3
• Conductor cross-section: 1.5 mm² per core
• Voltage rating: 0.6/1 kV
• Insulation/jacket: halogen-free construction
• Fire performance: reaction to fire class B2ca (reduced flame propagation)
• Smoke emission: low smoke formulation

How to use

Use this cable for permanent electrical wiring runs within buildings by routing it through conduits, cable ducts or appropriate cable trays, and securing per local electrical codes. Strip insulation carefully to expose conductors for termination in junction boxes, fixtures or distribution equipment, observing proper conductor identification and earth/ground connections. Ensure terminations and current-carrying capacities are compatible with circuit breakers and protective devices used in the installation.

What to consider before purchase

• Confirm conductor size (1.5 mm²) is adequate for the intended circuit current and voltage drop limits
• Verify the cable's fixed-installation suitability and whether mechanical protection or conduit is required
• Ensure halogen-free and B2ca fire performance meet local building codes and project safety requirements
• Check required lengths and installation accessories such as connectors, glands or junction boxes

Usage recommendations

Install and terminate the cable following applicable electrical standards and manufacturer guidance; use appropriate protective devices sized to the conductor and application to maintain safe operation and fire-safe performance.