elpar N2XH-J 5x10 mm² RE B2ca 0.6/1 kV halogen-free is a fixed-installation power cable designed for low-voltage energy distribution and power circuits. The cable features five 10 mm² conductors and insulation/materials formulated to be halogen-free, helping to reduce corrosive and toxic emissions in case of fire. It is supplied in reel (RE) form and carries a B2ca reaction-to-fire classification, making it suitable for applications where improved fire performance and limited smoke generation are required.
Advantages
This power cable combines a standard 0.6/1 kV voltage rating with five conductors of 10 mm² to support multi-core power distribution in buildings and industrial installations. The halogen-free construction reduces the release of corrosive gases and toxic substances during combustion, which helps protect sensitive equipment and improves occupant safety. The B2ca reaction-to-fire class indicates a higher level of fire performance compared with lower classes, and the reel packaging (RE) simplifies handling and installation over longer runs.
Suitable for
- Fixed electrical installations in residential, commercial, and industrial buildings
- Power distribution and multi-phase circuits requiring five conductors
- Areas where reduced smoke and toxic emission in case of fire are prioritized
- Cable routes requiring longer continuous lengths supplied on reels
When it may not be suitable
This cable is intended for fixed installation and may not be appropriate for applications that require continuous flexing, frequent movement, or direct burial without protective conduits unless the installation meets local regulations for such use. It is also designed for low-voltage systems up to 0.6/1 kV and is not suitable for medium- or high-voltage applications.
Key specifications
- Number of cores: 5
- Conductor cross-section: 10 mm² (each conductor)
- Rated voltage: 0.6/1 kV
- Construction: halogen-free insulation and sheath
- Reaction to fire class: B2ca
- Packaging form: reel (RE)
- Intended use: fixed installation for power distribution
How to use
Plan the routing and support points for the fixed installation, respecting local electrical codes and standards. Unwind the reel and cut required lengths, taking care to avoid kinking or mechanical damage to the sheath. Strip conductors to the appropriate length for termination at distribution panels, switches, or equipment terminals and use compatible lugs or connectors rated for 10 mm² conductors. Ensure mechanical protection where the cable is exposed to potential impact or abrasion and maintain recommended separation from heat sources. After installation, verify connections, insulation continuity, and protection device settings before energizing the circuit.
What to consider before purchase
- Confirm that a five-core 10 mm² cable meets the current-carrying capacity and circuit protection requirements for your application
- Verify local regulations and building codes regarding B2ca-class cables and halogen-free requirements
- Check whether reel packaging is appropriate for your installation access and handling needs
- Ensure compatibility with terminations and glands intended for 10 mm² conductors
Usage recommendations
For best results, install elpar N2XH-J 5x10 mm² RE B2ca 0.6/1 kV in fixed, supported runs, protect it from sharp edges and mechanical damage, and follow national wiring rules for conductor derating, grouping, and fire safety. Use appropriate tools and qualified personnel for termination and testing to ensure reliable and code-compliant operation.
