Transformer Engo T24-30W — 24V AC, 30W low-voltage power supply

Engo T24-30W is a compact 24 V AC transformer with a rated output of 30 W designed for low-voltage lighting and small electrical loads. It converts mains voltage to 24 V AC and provides stable power for LED drivers, halogen fixtures or control circuits. The unit is intended for indoor installations where a dedicated 24 V AC supply is required and offers a space-saving form factor for integration into cabinets, junction boxes or behind luminaires.

Advantages

The transformer provides a constant 24 V AC output at up to 30 W, ensuring predictable performance for low-voltage systems. Its compact size allows installation in confined spaces while maintaining heat dissipation suitable for indoor use. The device is engineered for simple electrical connection and reliable operation with common low-voltage loads, minimizing flicker and voltage variation under rated conditions.

Suitable for

• Low-voltage LED lighting systems that require 24 V AC input
• Small halogen fixtures and decorative lighting
• Control circuits, sensors and low-power actuators operating at 24 V AC
• Integration inside distribution cabinets, junction boxes or behind fixtures

Key specifications

• Output voltage: 24 V AC
• Rated output power: 30 W
• Intended use: indoor, low-voltage applications
• Form factor: compact transformer suitable for concealed installation
• Typical loads: LED drivers, halogen lamps, control circuits

How to use

Install the transformer in a dry indoor location with adequate ventilation and secure mounting. Connect the mains input according to local wiring regulations and ensure the supply is switched off during installation. Wire the 24 V AC output to the low-voltage load, observing polarity where relevant for connected equipment and verifying that the combined load does not exceed 30 W. After wiring, restore mains power and verify the output voltage and proper operation of connected devices.

Usage recommendations

For reliable operation, avoid exceeding the rated output power and allow for a modest safety margin when sizing the transformer. Use proper overcurrent protection on the mains side and ensure compatible wiring and connectors for 24 V AC loads. If the transformer is to be installed in an enclosed cabinet, provide ventilation and maintain separation from heat-sensitive components.