Mixer Paddle EPM E-300-1303 for Adhesive Mortars, Masonry and Plasters 100x600x10mm

The EPM Mixer Paddle E-300-1303 is a purpose-built mixing blade for use with handheld electric mixers. With overall dimensions of 100 x 600 x 10 mm, the paddle features a sturdy profile designed to produce consistent, homogenous mixes of adhesive mortars, masonry mortars and plasters. The blade geometry and shaft length are optimized for typical on-site mixing depths, enabling efficient incorporation of cement-based and gypsum-based compounds in renovation and construction tasks.

Advantages

The solid 10 mm thick blade construction provides durability under heavy-duty use while maintaining straightness and balance during operation. Its 100 mm working width and 600 mm length allow effective circulation of material in common mixing buckets and drums, reducing mixing time and minimizing air entrainment. The paddle’s profile is suited to handle both dense cementitious mixes and more fluid gypsum-based plasters, ensuring even consistency and fewer lumps.

Suitable for

• Mixing tile adhesive and thin-set mortars
• Preparing masonry mortars and jointing mixes
• Mixing gypsum-based plasters and render
• On-site renovation, tiling and masonry preparation with handheld mixers

Key specifications

• Blade dimensions: 100 x 600 x 10 mm (width x length x thickness)
• Material profile: rigid paddle design for cement and gypsum compounds
• Compatibility: designed for use with standard handheld electric mixers
• Application types: adhesive mortars, masonry mortars, plasters and renders

How to use

Attach the mixer paddle securely to the chuck of a compatible handheld electric mixer following the mixer manufacturer’s instructions. Place powder and liquid components into the mixing container in the order recommended by the material manufacturer and immerse the paddle before starting the mixer at low speed to avoid splashing. Gradually increase speed and move the paddle through the mix to achieve a uniform consistency, then run briefly at medium speed to remove remaining lumps and entrained air. After use, clean the paddle promptly with water and a stiff brush to prevent material hardening on the blade.

Usage recommendations

Use the EPM mixer paddle with mixers that provide adequate torque for dense cementitious mixes; avoid excessive speed that can cause splattering. For best results, follow the mixing ratios and procedures supplied by the mortar or plaster manufacturer and inspect the paddle for wear or deformation before each use.