Stainless Steel External Corner Trowel 2K EPM 60/90 mm

Stainless Steel External Corner Trowel 2K EPM 60/90 mm is a finishing tool designed for creating and smoothing external corners with a 60/90 mm profile. Manufactured from stainless steel, the trowel provides corrosion resistance and consistent edge geometry to achieve accurate corner shapes when working with plaster, render and cement-based materials. The model features a two-component (2K) ergonomic handle that enhances grip and control during repetitive finishing tasks.

Advantages

The stainless-steel blade offers durability and resistance to rust, maintaining a straight working edge over prolonged use. The 2K handle combines a rigid core with a softer outer grip to reduce slippage and improve handling during wet or dry operations. Precise corner profile and firm blade fixing result in uniform finishes and reduced rework. The tool is lightweight enough for overhead and elevated work while remaining stable for floor- and scaffold-level finishing.

Suitable for

• Finishing external 60/90 mm corners in plaster and render systems
• Smoothing cement-based and lime-based coatings at building corners
• On-site plastering, renovation and repair works requiring straight external edges
• Professional plasterers, renderers and general contractors

Key specifications

• Material: stainless steel blade for corrosion resistance and durable edge
• Corner profile: 60/90 mm external corner geometry
• Handle: two-component (2K) ergonomic design for improved grip and control
• Intended materials: plaster, render, cement-based and lime-based mortars
• Usage: manual finishing of external corners in building façades and interior partitions

How to use

Prepare the corner by applying the chosen plaster or render to both sides so that the material is evenly distributed. Place the trowel against the external corner with the blade aligned to the 60/90 mm profile and pull or push along the corner with steady pressure to form a clean, straight edge. Use overlapping passes as needed to remove excess material and achieve the required finish. Rinse and wipe the blade regularly during work to prevent buildup and maintain a consistent edge.

Usage recommendations

Store the tool dry after use and clean with water before the material hardens. For best results, hold the trowel at a slight angle and use consistent pressure across the pass. Inspect the blade periodically for nicks or deformation; replace if the edge no longer produces straight corners.