Trowel EPM felt 8 mm 130×250 mm E-315-1120 – felt float for finishing

EPM felt trowel E-315-1120 is a finishing float with an 8 mm thick felt pad and a 130×250 mm working surface. Designed for smoothing and finishing cement, plaster and render surfaces, the felt pad reduces scratching and produces a fine textured finish. The tool is suitable for use on walls and ceilings in both renovation and new-construction settings and is intended for professional and DIY use where a controlled, uniform finish is required.

Advantages

The 8 mm felt pad provides consistent contact with the substrate, minimising marks and helping to distribute pressure evenly across the working surface. The 130×250 mm blade size offers a balance between manoeuvrability and coverage, allowing accurate work near corners and in confined areas while still covering moderate surface areas efficiently. The felt surface is resilient and helps retain moisture at the contact plane, improving finishing on cementitious and lime-based materials.

Suitable for

• Smoothing and finishing cement screeds and renders
• Finishing plaster and skim coats on walls and ceilings
• Applying a fine textured finish to interior and exterior surfaces
• Detail work around corners, window reveals and small areas

Key specifications

• Felt pad thickness: 8 mm
• Working surface dimensions: 130 × 250 mm
• Pad material: dense finishing felt
• Tool type: handheld finishing float
• Primary application materials: cement, plaster, render

How to use

Before use, ensure the surface is free of loose debris, large aggregates and excess water. Hold the trowel with a comfortable grip and apply light, even pressure while moving the float in overlapping passes across the surface. For best results on fresh screed or render, work while the material remains plastic but firm enough to support the float without gouging. Clean the felt pad after each work session to remove adhered material and prevent particle buildup that can cause scratches.

Usage recommendations

Use short, controlled strokes when working close to edges and corners. For smoother finishes, keep the felt pad slightly damp and perform a final light pass once material has stiffened but is still workable. Store the tool flat and protect the felt from crushing or contamination to maintain consistent finishing performance.